Just replace and in the menu it will say Format
if i replace my HDD in my DM7020, will i have to reimage? Or can I just swap it in, then format?
My current one is just about dead me thinks.
Look Here -> |
Just replace and in the menu it will say Format
When you do things right, people won't be sure that you have done anything at all
allstarnz (05-01-10)
thanks, thought as much, just wanted to be sure
hmmm, the farken thing still won't format properly, despite me leaving it overnight.
i tried this
mkfs.ext3 /dev/ide/host0/bus0/target0/lun0/disc
as per (part1 doesn't exist, only disc)
but it still doesn't work properly, do I need to create a volume as well?
what's wrong with formatting it through the menu options? That's all I've ever done.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
hmm, I thought so too. I think I might just double check I've got the jumpers right....
goes off and dismantles box, again
i suspect the 'new' drive might be a bit suspect....
and to conclude this rather one sided conversation....
I put the drive in my PC, fired up Hirens boot CD, and formatted the drive as ext3 with Partition Magic. Popped it back in the Dreambox and it seems to work. Interestingly, it seems it didn't format in the Dreambox, as the whole drive was still being reported as unallocated
It's running as a slave (despite my jumper settings), but it works, so i'll just ignore that for now.
Bookmarks