not sure if this will help did you try a straight through lan cable or a crossover lan cable that maybe your problem??
Hi Guys,
Im currently setting up my dreambox's to my home network.
I have a D-Link DWL-2000AP+ and a DWL-900AP+, i followed this guide
and was able to set up the 2000AP+ to work on my DM7020. But when i tried setting up the 900AP+ i have problems even though the tute if for the DM900AP+.
When i connect the lan cable to the dreambox the LAN light doesnt turn on 900AP+, but when ever i connect the lan cable to the computer the lan light comes on straight away for the 900AP+.
Ive tried different lan cable and tried it on both the DM7020 and DM500 but on both the light doesnt come on.
If anyone has any suggestions i will be willing to try them.
Cheers
DM600 & 85cm Motorised Dish
Look Here -> |
not sure if this will help did you try a straight through lan cable or a crossover lan cable that maybe your problem??
Hi All,
You could try setting one as "access point" and the other set as "client" - also, is the decoder using an IP address or have you got that set to DHCP?
I have got a Dlink DSL-G604T as access point and a Dlink DAP-1150 as client both using IP addresses and using a crossover cable and that works ok with my DM500.
crossover or straight cable dont really matter as both will work.
Hope that helps
cheers
hannible
Last edited by Hannible; 10-01-10 at 02:24 PM.
yep crossover cable fixed the problem of the lan light not appearing.
But now when i try and connect to the dreambox from my computer the emigma web interface doesn't come up for the DM500's i tried swapping the WAP's around and they both worked successfully on the DM7020 so they are not the problem and i recently had a router connected to the DM500 so the lan port isnt the problem.
Im unsure of what the problem is any ideas ???
EDIT:
Found my problem, forgot to add the DM500 to my wireless internet devices
Cheers
Last edited by rewstar; 10-01-10 at 06:55 PM.
DM600 & 85cm Motorised Dish
Bookmarks