guys, I just need a working system with the SPA SPH SPM channels and sub channels, thats the reason i went to scam as cccam didnt read teh sub channels correctly,
so if scam is a hasle and no good, what should i try? please help me
Hi guys,
I got a DM800
I installed scam on it to read orange card, but I need to find how to add the box key, i found the conf file, but not sure where to add the boxkey function
please point me to the right direction,
thanks
Look Here -> |
guys, I just need a working system with the SPA SPH SPM channels and sub channels, thats the reason i went to scam as cccam didnt read teh sub channels correctly,
so if scam is a hasle and no good, what should i try? please help me
use newcs and mgcamd
sat_info your on the ball
I'm having similar problems, but was trying some different cams.
Is there any info you can point me towards that shows me how to set up newcs and mgcamd to get a picture from an orange card. (at this stage not for CS, just trying to get the damn thing working in the DM800)
its been documented/Spoken about EVERYWHERE and on this forum discussed many times.
you need a BOXKEY in newcs, do a search on boxkey+orange you will find it.
Evocamd works best on some boxes and mgcamd on others
Last edited by davo; 16-01-10 at 12:51 PM.
thanks allot man
its working i managed to get my HD box to ready the orange card, after allot of reading
so SPA now works, which wasn't using ccam, but the issue is with DM500 i had the gree button to show me the sub channels, but with DM800 the green button doesnt show me the sub channels, is there another button?
im using nabilosat image here
my 2nd problem is when i reboot the dreambox newcs and mgcamd doesnt start automatically i have to go on comand line and start them manually
my 3rd problem is setanta, I can't get it going im using orange card, what do i need to do? i did a fair search in forums for this one and i found nothing
thanks for help guys
Just a little bit then hey?
once you have boxkey in then you run newcs, goto telnet first, turn on logging options to console in the .xml then run it.
you will see it reads the card returns all the details of it and says Ready.
now you need to setup your client software eg mgcamd and ensure your sending EMMs & ECMs at least on the updating box.
{A:01} is best option in mg_cfg located in /var/keys/ (i may have the format wrong but you want a 01 not 02. all other boxes can use 02 if you like.
as i said if mgcamd dont get you pics try evocamd one or the other should work fine for you. if not then you ARE doing something wrong maybe the boxkey you worked out is wrong or something like that. If you need a hand Im sure happy to assist. PM me for help.
Davo
slingy (17-01-10)
Thanks Davo. I'll give it a shot when I'm home.
I'm just hoping my card isn't one of the new ones everyone is having the problems with.
I've got my Blue card going fine, but my orange card hasn't worked outside the supplied box. I'd love to get HD going on my DM800.
The problem with searching for info is that the only relevent info for Australian cards is from this forum, but a lot of the threads don't have the information and refer to other threads.
Also, much of the information given is speculative and would not necessarily fulfill my requirements.
Hi,
afaik you will not get HD with newcs. Have a look on this forum is a new thread about oscam with config files examples, this will be a way to go for you.
Cheers
danone (17-01-10)
Bookmarks