Dm500s newcs cccam

**nwa** · 16-02-10, 09:37 PM

Hi,

Ive got an orange card working on a pc with phoenix but want to save pc power and run on dm500s, but am having trouble getting it to work in internal reader. I cannot access the newcs website from dm500s so I can't even see the status or troubleshoot.

Can someone tell if if the card will work in dm500s? or post their newcs config, so I can have a look what im missing?

**toor** · 16-02-10, 10:34 PM

Most likely newcs is not running telnet into the dreambox and see if its running or not.

yes it will work.

**nwa** · 16-02-10, 11:41 PM

I think my newcs is running, I can telnet and see the newcs process by doing the "ps" command. Is there anything else I should be doing? Basically if I do get newcs running, I should be able to view it in the web broswer as or telnet IP port 1001, is that right?

**toor** · 16-02-10, 11:48 PM

It's port 8080 this bit below in the newcs.xml file.

Code:

<httpd>
        <server> 
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            
            <name>admin</name>
            
            
            <password>newcs</password>
            
            
            <accesslevel>admin</accesslevel>
        </user>

**jtc2005** · 17-02-10, 01:46 AM

Originally Posted by nwa

Hi,

Ive got an orange card working on a pc with phoenix but want to save pc power and run on dm500s, but am having trouble getting it to work in internal reader. I cannot access the newcs website from dm500s so I can't even see the status or troubleshoot.

Can someone tell if if the card will work in dm500s? or post their newcs config, so I can have a look what im missing?

post your newcs.xml

**nwa** · 17-02-10, 10:01 AM

Yep, Im trying on port 8080 in web browser and port 1001 in telnet, nothing there, whatever it is there is something wrong, and I do have a feeling newcs has not started properly. Here is my newcs.xml (note I have been trying a few things hence some parts commented out or different port numbers etc):

<newCSconfig>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>

<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>myboxkey</boxkey>


<carddetect>no</carddetect>
<newcamd_port>15050</newcamd_port>
<autosid>Yes</autosid>

<pincode>0000</pincode>
<priority>round</priority>
</device>



</readers>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>user1</name>
<password>pass1</password>

<port>15050</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>

</user>
<user>
<name>user2</name>
<password>pass2</password>


<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>

</user>

</newcamdserver>
</newCSconfig>

**LeroyPatrol** · 17-02-10, 10:43 AM

you need to also configure cccam.cfg and have a line pointing to newcs in the form of

N: x.x.x.x 15050 user1 pass 1 01 02 03 04 05 06 07 08 09 10 11 12 13 14

x.x.x.x - your boxes IP address or 'local' should also work.

**nwa** · 17-02-10, 11:43 AM

yep I have that line in ccam.cfg, but I suppoe at this stage there is something wrong with newcs, I cannot access the status webpage.I may have to try on another box I have with a different image, this one is pli jade, any other tips? or if someone can post their working newcs file, it would be a good test.