it's prob pointed at C1. Look at the lnb and see what the freq is and input this into your STB under dish settings Optus C1 and then go to manual scan and flick through the freq to see if you get any green bars!
Hi guys shifted into a new house recently with a small dish on the roof,,I have a sat finder and a strong srt 4658...how do i find out what the hell the dish is looking at...cant for the life of me figure out a way to do it,,
thanks
Russ
*Understeer is when you hit the wall with the front of your car and oversteer is when you hit the wall with the rear of you car.
*Horsepower is how fast you hit the wall and torque is how far you take the wall with you.
Look Here -> |
it's prob pointed at C1. Look at the lnb and see what the freq is and input this into your STB under dish settings Optus C1 and then go to manual scan and flick through the freq to see if you get any green bars!
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
no green bars on c1
*Understeer is when you hit the wall with the front of your car and oversteer is when you hit the wall with the rear of you car.
*Horsepower is how fast you hit the wall and torque is how far you take the wall with you.
do the same for D1, D2 and Intelsat/Pas8
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
been through the lot.. i think i am going to have to call some one in
*Understeer is when you hit the wall with the front of your car and oversteer is when you hit the wall with the rear of you car.
*Horsepower is how fast you hit the wall and torque is how far you take the wall with you.
Or you could have a go yourself! Didn't you say you had a satfinder? Try find Optus C1 first and Check out
Take note of how to use the sat finder and also select a valid transponder in the Optus C1 manual scan menu.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Do as leroy suggests...go up on the roof, look at the lnb (white or blue receiver at end of dish arm), write down what it says, and post back here with the details to get help
go to dishpointer.com enter your address and select the sat you want to point at and it will display a google map with a line to the direction sat.
What LNB settings are you using? If they don't match the LNB you won't get anything.
I have to pull the lnb off as tthere are no numbers on it
*Understeer is when you hit the wall with the front of your car and oversteer is when you hit the wall with the rear of you car.
*Horsepower is how fast you hit the wall and torque is how far you take the wall with you.
Don't do that unless you mark exactly what angle etc it was on.
It is likely to be 11300 or 10700
In your receiver menu, go look what setting your lnb is on now.
If it says it is 11300, change it to 10700 and try a scan
If it is set on 10700, change it to 11300 and try a scan
Bookmarks