look like some kind of toggle plug, you can get plastic ones that you screw into the gyprock then mount what ever to it as long as there is not to much weight
It might be a long shot but im hoping someone will know what their called.
Theirs no back plate at all, just these 2 screw type things. An optus installer put these in over 5 years ago, when we had cable internet installed.
Look Here -> |
look like some kind of toggle plug, you can get plastic ones that you screw into the gyprock then mount what ever to it as long as there is not to much weight
dont say linux if i wanted it id install it
similar to
These and the tool
It's a Molly Plug... (Sleeve-Type Hollow Wall Anchors)
See here... scroll down to near the bottom.
Srattus you beat me to it
You should be able to get them anywhere...........i find HILTI the best for range
2011.........looking better for the Cows!!!!!!!!
thank you very much gents, I'm 1 step closer to getting this dish up
plaster toggles, available at bunnings. make a hole just smaller than the toggles shaft diameter, press it into place, insert screw, tighten up, flares open shaft which compresses at the back of the plaster making a firm fit, remove screw, add fitting to be fasterned, re-insert screw and tighten up till firm.
There are a few variations of this at Bunnings as mentioned by porkop, both plastic and metal.
Bookmarks