-
Pioneer vsx 531 hdmi board
For those that deal with sort of stuff, I have a Pioneer VSX531 av receiver that suffered some damage from a lightning storm.
Had it checked out by a friend and the only apparent damage seems to be the HDMI board which has a hole in one of the chips.
Have tried on line to find a board but there deosn't seem to be any that I can find. From what I gather because I'm not a registered repairer Pioneer wont deal with the common folk I was told.
Couple of questions from this is really how readily available are the replacement boards and is it worth getting another. Like I said everything else seems to work and the only error that comes up is a flashing HDMI symbol on the front display.
Is there anywhere that I can look as I have spent countless hours on the net trying to source one.
Part number on the board is as follows,
Onkyo & Pioneer
TX- SR252 / VSX330
D- Main B'D
7020-07947-020-1s
STEP : MM
Any thoughts and help appreciated
-
Is the chip with a Hole the panasonic chip? and is this the board?
yep sure is
hopefully the pic is ok
the panasonic chip is the bottom one as you said
cheers
Last edited by efab; 06-02-18 at 11:56 PM.
Was thinking along the lines of component repair, But not one that appears to be easy or cheap to get . MN864788? also found in some Panasonic 4K TVs, 50CX800 as one example if you can find a giveaway smashed one.
Would be a gamble it's only that but I've had reasonable luck with some TVs with dead HDMI if they have a dedicated chip that can be replaced.
Seen a couple of used Pioneer VSX531 around $350 -370
thanks for your help I'll keep looking.
May try pioneer and see what they say but I doubt they will even respond
cheers
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks