Igo Primo

[laputa99]

give up the TTS. do anyone have 320x240 data for primo 1.1 download link?

[peterA]

At firt I like to thank all involved in making IGO PRIMO such a fantastic navigating tool "Your Work is very much appreciated"

I am using a chinese GPS KNAV 6 Inch, I have loaded Igo Primo using DATA.zip 800X480 and GJmpp v1.12, all works good so far except when I try to add to favourites is says unable to find file: favoritsonmap_icon.spr. Has anyone else experianced this problem? This also occurs in default mode.Your reply will be very much appreciated.

Thank you

PeterA

[NoService]

At firt I like to thank all involved in making IGO PRIMO such a fantastic navigating tool "Your Work is very much appreciated"

I am using a chinese GPS KNAV 6 Inch, I have loaded Igo Primo using DATA.zip 800X480 and GJmpp v1.12, all works good so far except when I try to add to favourites is says unable to find file: favoritsonmap_icon.spr. Has anyone else experianced this problem? This also occurs in default mode.Your reply will be very much appreciated.

Thank you

PeterA

Thats an error within the data zip file!!

you would need to acquire another data zip to try not all work flawlessly

NS

[peterA]

Thanks NS, I will try to find another data.zip and will let you know.
Regards
PeterA

[letrabob]

TTS does work!!!

i am using the TTS files from IGO8 .....they work for Igo8/Primo/Primo1.1/Amigo/Becker.

NS

When you say you used the IGO8 tts files was that with the Primo Nuance engine or did you also use the loq files? Just to save some time trying both!!

[NoService]

When you say you used the IGO8 tts files was that with the Primo Nuance engine or did you also use the loq files? Just to save some time trying both!!

The TTS files i use are LOQ files.

My main unit is 64MB wince 6 and it runs TTS fine

NS

[letrabob]

The TTS files i use are LOQ files.

My main unit is 64MB wince 6 and it runs TTS fine

NS

Thanks NS. I've been using the Nuance tts with Primo but can't locate a UK English voice so I'll try reverting to the loq files with dear old Kate.

[heriadi]

Sorry for the link problem I didn't know, try this one:


This is 800x480, data.zip version 4, if it doesnt work I will upload again
somewhere else.

Could you reupload it please, all the link are dead

[bazzle]

don't forget fellas there are two different loq.dlls one lot for wince 4.3 and one lot for wince5. Go to this link and arrow down to post #6 and download the loq.dlls. . The dlls there work on both.

[NoService]

ive got no idea what version mine are but they work on wince6

mine came from hollowmans original igo thread


NS

[ktloog]

Hi all , everything work well , just I have a problem when I put address and press next not working and give me this massege ( failed to open file : skin_night/small_flags.spr exiting application ) and restart after that !!! So what I have to do ?

[NoService]

Hi all , everything work well , just I have a problem when I put address and press next not working and give me this massege ( failed to open file : skin_night/small_flags.spr exiting application ) and restart after that !!! So what I have to do ?

thats a data or branding zip file error...see if you can locate your resolutions files from another source.

NS

[ktloog]

i try but not work , i have 2din dvd and 800/480 resoulation , so pls if any one have data file for it pls upload it , thanks

[laogia]

@ktloog!
Here link for data,branding &sys.txt on my double din 800_480 res, i had no problem with them, you can copy my sys.txt and replace somelines to suit your unit, it has speed- camera sound warning when you rearch about 150 meter.



Have fun.

[ktloog]

I have this massege ( failed to open file : ui_igo9\800_480\ui\green_800_480.ui exiting application ) ???
So could u pls upload the igo primo app you have with out the content file ( I mean igo.exe , data , dll etc ...., all this staff , cos I think the problem from the app I have , I don't know !!!???

[laogia]

I think, you was mess-up with the other primo version, here link i put 2 excutive files, IGO.exe (22/07/10) for the data & branding i was upload, and the other for primo 1.1 green.

[anew]

I have this massege ( failed to open file : ui_igo9800_480uigreen_800_480.ui exiting application ) ???

I have the same problem... I installed Primo from LAOGIA link, worked well last night, but this morning when I turned it on, I had the above error as the GPS loaded.

Any ideas?

SYS.TXT


[folders]
has_secondary_root=0

[interface]
routepath="\\Storage card\\"
skin="ui_igo9"
landscape=1
show_zoombar=1
show_exit=1
show_minimize=1
extra_settings=1
resolution_dir="800_480"
vga=0
use_big_lang_flag=1
mapfontscale=220
minzoom2d=50
maxzoom2d=5000000

[Rawdisplay]
HighRes =0
screen_x = 800
screen_y = 480
class = "landscape"

[navigation]
autoreplan_action=0
autozoom_action=0

[folders]
kmlpoi="userdata\poi" ;"content\userdata\poi"

[map]
3d_max_tiltlevel=10000
3d_max_zoomlevel = 3000
3d_min_zoomlevel=40
3d_max_zfar=2000
fake2d_max_zoomlevel = 3000
3d_zfar_horizon_ratio = 200
roadblockicon_maxzoom = 2000
2dheadup=1
sieve_mode=1
3d_scale_carmodel=1
3dcarsizemin=8500
3dcarsizemax=9500
3dcarsizemul=20000
3d_max_tiltlevel=9000
3d_default_tiltlevel=8500
3d_min_zoomlevel=20
3d_max_zoomlevel=800

[debug]
no_file_cache=0
max_memory=35000000
reserve_memory=1700000
cache=300000
skip_eula=1
compass_type=3
fov=40
smart_2d=1
earth=1
show_oneway=1
disable_outlookpoi=1
show_performance=0
show_oneway=1
show_speed_limit=1
show_poi_boundingrects=1
show_poi_areas=1
show_oneway_3d=1
speedcam_enabled=1
enable_roadshadow=1
enable_buildings=1
enable_roadsign=1
speedcam_enabled=1
show_pedestrian=1
sound_q_length=200
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=400
hnr=1
show_hnr=1
show_oneway_3d=1
show_arrows_on_route=1


[smartzoom]
minangle=0
maxangle=70

[gps]
port=2
baud=4800

[warning]
speedcam_enabled=1
speedcam_warning=1
speedlimit_warning_visual=1
speedlimit_warning_voice="!radar"
speedlimit_warning=1
speedwarn_alt_tolerance=110
speedcam_soundtype_8=2
speedcam_max_lookahead="200"

speedwarn_alt_builtup_based=1
pedestrian_warning=0
speedcam_visualtype=1
speedcam_soundtype=2
speedcam_warning=all speedcam types
speedwarn_tolerance=110
speedwarn_toltype=1 ; absolute or percentage
approach_beep_distances=200
warn_distances=100
section_beep_distance=200
speedcam_snap_distance=200
speedcam_max_lookahead=400
speedcam_maxdistance_from_road=10

[feature]
text_guidance=1
signpost_coloring=1
tmc_event_coloring=1
tmc_traffic_side=1
ding=0

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[camera.roundabout]
enabled=0

[camera.intersection_zoom]
enabled=0

[camera]
minzoom=30
maxzoom=80
defaultzoom3d=50 ; this should do the trick
minangle=10
maxangle=85
defaultangle=70
angleoffset=30

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 10
backlight_min = 0
backlight_reverse = 0
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 61
backlight_events = 1
skip_suspend_process_all=1
disconnect_gps_on_suspend=0
powermgm_state="0"
backlight_day="100"
backlight_night="50"

[poi]
enable_pois_before_080217=1
multi_poi=1

[3d]
road_shield=1
road_box=1
planned_route_contour_width = 1
planned_route_track_contour_width = 1
planned_route_track_width = 5

[3d_config]
roadsign_lines_per_screen=15
disable_roadsign_navigation_mode=0

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Warning, speed camera ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=-1
approach_beep_sound="!radar"

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Warning, mobile speed camera ahead"
activated_min_speech_repeat_delay=-1
approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none
min_frc=-1
approach_beep_sound="!radar"

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Warning, traffic light speed camera ahead"
activated_min_speech_repeat_delay=-1
approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none
min_frc=5
approach_beep_sound="!radar"

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Warning, average speed camera ahead"
activated_min_speech_repeat_delay=-1
approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none
min_frc=-1
approach_beep_sound="!radar"

[speedcam_category:4]
approach_beep_distances="150,150"
activated_spoken_type=speech
activated_speech="Warning chris, speed camera ahead"
activated_min_speech_repeat_delay=-1
approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none
min_frc=5
approach_beep_sound="!radar"

[speedcam_category:6]
approach_beep_distances="150,150"
approach_beep_sound="!radar"
min_frc=5

[speedcam_category:7]
approach_beep_distances="150,150"
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:8]
approach_beep_distances="150,150"
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:9]
speedcam_snap_distance=50
approach_beep_distances="150,150"
approach_beep_sound="!radar"
overspeed_sound="!radar"
min_frc=5

[speedcam_category:10]
approach_beep_distances="150,150"
approach_beep_sound="!radar"
overspeed_sound="!radar"
activated_spoken_type=speech
activated_speech="Warning chris, speed camera ahead"
activated_min_speech_repeat_delay=-1
approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none
min_frc=-1

[speedcam_category:11]
approach_beep_sound="!radar"
activated_spoken_type=speech
activated_speech="Warning camera,speed camera ahead"
activated_min_speech_repeat_delay=-1
approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none
min_frc=5

[speedcam_category:12]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:13]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:14]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:15]
approach_beep_sound="!radar"
activated_spoken_type=speech
activated_speech="Warning, congestion charge zone ahead"
activated_min_speech_repeat_delay=-1
approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none
min_frc=5

[speedcam_category:16]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:17]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:18]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:19]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:20]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:21]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:22]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:23]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:24]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:25]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:26]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:27]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:28]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:29]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:30]
approach_beep_sound="!radar"
min_frc=-1

[speedcam_category:31]
approach_beep_sound="!radar"

activated_spoken_type=speech
activated_speech="Warning, hazardous intersection ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

[estimaster]

NEW FROM IGO

iGO primo™ - Simply Advanced Navigation
Requirements: 64 MB RAM (128 recommended), 400+ MHz ARM 9/11 CPU, WQVGA (480x272) resolution ONLY!!. WinCE 4.2/5.0/6.0 OS tested
Overview: The new OEM product that combines simplicity of use with the most recent technological advances from NNG Global Services.

Download



- download, unpack the provided archive to the root of your SD Card/Resident Flash.
- launch the software by executing iGO.exe

NOTE: Additional SYS.TXT modifications might be needed to get your specific hardware (GPS/TMC receiver) recognized by the software.

NOTE: At the moment only standard PNA resolution of 480x272 is supported. This software wont work on devices with other resolutions until a compatible skin is provided for your device specific resolution.

NOTE: Make sure you RENAME any iGO folders from previous versions on your SD Card/Internal Storage, as Primo will find them and try to load them resulting in a crash.

use your current igo8 content for maps etc

thanks to mobilepassion and in particular slr & sr

NS

Link not working??????

[linc_d]

@ktloog!
Here link for data,branding &sys.txt on my double din 800_480 res, i had no problem with them, you can copy my sys.txt and replace somelines to suit your unit, it has speed- camera sound warning when you rearch about 150 meter.



Have fun.

Can anyone please post a new link for this?

Thank you.

[laogia]

Here the link: