NEW FROM IGO
iGO primo™ - Simply Advanced Navigation
Requirements: 64 MB RAM (128 recommended), 400+ MHz ARM 9/11 CPU, WQVGA (480x272) resolution ONLY!!. WinCE 4.2/5.0/6.0 OS tested
Overview: The new OEM product that combines simplicity of use with the most recent technological advances from NNG Global Services.
Download
- download, unpack the provided archive to the root of your SD Card/Resident Flash.
- launch the software by executing iGO.exe
NOTE: Additional SYS.TXT modifications might be needed to get your specific hardware (GPS/TMC receiver) recognized by the software.
NOTE: At the moment only standard PNA resolution of 480x272 is supported. This software wont work on devices with other resolutions until a compatible skin is provided for your device specific resolution.
NOTE: Make sure you RENAME any iGO folders from previous versions on your SD Card/Internal Storage, as Primo will find them and try to load them resulting in a crash.
use your current igo8 content for maps etc
thanks to mobilepassion and in particular slr & sr
NS
Last edited by NoService; 29-05-10 at 12:05 PM.
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
Look Here -> |
Just rename your iGO8 folder and Primo wont change a thing
Thx Sylar (JM) and crew
Thanks NS!
I used GPS lauching, it loaded fine, don't need to delete old one.
Yep when i posted this i hadn't set it up.
Upon installing there is NO NEED to delete anything just rename your igo8 folder.
I have edited the post to include "RENAME" not delete.
NS
Last edited by NoService; 29-05-10 at 12:06 PM.
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
My device just sits there trying to acquire satellites. Is there a file I need to edit?
yes in your Primo folder you will find sys.txt
open in notepad and add this
[gps]
port=1
Baud=4800
change port and baud numbers to suit your device
NS
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
letrabob (22-07-10)
I spose thats the fun part, trying to work out the settings for the device you're using.
Hi!
I success loaded on uniden, works perfect. But can not work out how to load on to double din Res 800_480, i did change data.zip to 400_240, and put on sys.txt
[interface]
show_exit=1
resolution_dir=400_240
vga=1
extra_settings=1
screen_x =800
screen_y =480
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class =landscape
It loaded but hang at English install.( i deleted all other language and keep only English zip on folder lang )
any idea?
from another forum
to enable full screen on device with any resolution, please enter the following lines into your SYS.TXT
[interface]
show_exit=1
resolution_dir="480_272"
vga=0
[rawdisplay]
highres=0
screen_x=480
screen_y=272
stretch=1
try that and see if it helps i cant test because my gps is 480x272
NS
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
letrabob (11-08-10)
Before changed the data.zip to 400_240, I entered the lines as NS advices, it showed up " Skin not compatible on this device", that's why i changed data.zip. I reckon the problems, deleted all other languages on folder lang, will try again tonight, see how it goes.
Joe.
I want to run the content folder from IGo8 on primo is this the correct sys txt?
[folders]
content="\Storage Card\IGO8\content"
cheers
sure is but make sure Storage Card is correct, mine is SDMMC.
NS
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
agil81 (04-06-10)
Another option to keep iGO8
Add this toPrimo's Sys.txt
[folders]
has_secondary_root=0
Now Primo wont look for iGO
NoService (01-06-10)
does this download include smart routes
A few things for your sys.txt
for TTS so it will tell now the proper street names instead of "right into L19"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=2
to stop Primo from counting down when unplugged
[shutdown_time]
interface=0
to make igo and primo use same content including tts
[folders]
content="\Storage Card\IGO8\content"
tts_loq="\Storage Card\iGO8\TTS_Loq"
change storage card to suit your cards name.
make sure you have tts files (not tts folder) in primo directory
to let igo8 and primo play together ie: no folder renaming
[folders]
has_secondary_root=0 thanks Jaz808
if you get no gps signal
[gps]
port=1
Baud=4800 change port and baud numbers to suit your device
NS
Last edited by NoService; 31-05-10 at 04:09 PM.
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
NS!
Finally, i can load primo on d/din Res 800_480 with both data.zip 480_272 and 400_240, but not take for drive yet. Will do tomorrow, if have time.
Thanks.
NoService (01-06-10)
Hi NOSERVICE..the mega link is down, can yo uhelp..?
THANK YOU SO MUCH
link is not down i just tried it
NS
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
some mirrors just in case the 1st link REALLY does get removed or you have problems using megaupload
NS
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
Bookmarks