Dont know if any you have stumbled across this. I set it up last night and impresed at the quality.
Details here
Now I can watch livetv on the iphone or ipad and stay on the pot all night!
Look Here -> |
Did you customize the channels ini file if so would you care to share your file. I can find how to get the zap info but could not work out how to get the stream info for the ini file.
mine looks something like this
Channel-10.mp4
SBS.mp4
SBS2.mp4
E!.mp4
Remember remove web authentification off your Dreambox.
Last edited by Duc998; 21-06-10 at 01:51 PM.
jonc (21-06-10),nihonjin (21-06-10),statesmanjeff (25-06-10)
I should say to be a little more secure is to allow no web authentification for the ip address of your Air Video Server IP.
WOW!! got this working on my iphone & I was so impressed it finally convinced me to buy a ipad. It works great on it too... Thanks for the heads up Duc998
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
All good got it going and works a treat
have not tried it... but looks good... will be trying it this week
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
I am having a go at this but I think am having some problems getting the Zap URL and stream URL right...
It is obviously loaded into the channel.ini file ...
I must be close as when I go to "play with live conversion" on the iphone it says loading movie but never does it.
Also noticed if I go to "convert" on the iphone I get "currently converting XXX.mp4" but then it crashes the Air video server with a fail message.
Does anyone have suggestions on where my problem may be?
Sorry been a while since I've checked this thread.
I remember I had a problem with using some of the other mp4's from the modpack. Make sure you use the db2-RTL.mp4 or the otherone in the Dbox2 directory. The other mp4's did not work for me.
Works well for me on the ipad and iphone however sometimes get a 3sec delay in audio...
Has anyone been able to successfully make the thumbnails?
Yes, made the thumbnails. It's a bit time consuming just follow the instructions on the tutorial the logos can be found on Lyngsat. Make sure you resize and use the right .bat file for 16.9 otherwise it will display in the wrong aspect ratio. I ran the .bat files as administrator on the cmd prompt.
Here's a few I've already done..
Last edited by geosatman; 13-07-10 at 04:23 PM.
I believe this is my problem - how do I find what I need to put in for my setup?
BTW what does the "cgi-bin" represent??? .. is this like a directory path that is needed ?
...I know this is my only problem for Air Video as I can stream video files from the PC to the iphone (called up from another shared directory within the air video app)
Looks nice would really like to get the interface to the dream box going ...
I found I needed to add the pids on the second line for my dm7020 dm500.
example:
E!.mp4
the "zapTo?path=" can be found in the stream info under service reference.
The second line can be copy and pasted from the bottom left hand corner of vlc window
while streaming the desired channel.
toor (22-07-10)
Thanks ...
Ok I have some success as I can see that the channel changes through the air server confirming that the zap line is working.
Now I just need the right info for the last line to get the streaming going.
The lines I am using is below.
---------------
001-ARD.mp4
zapTo?path=1:0:1:791b:1f:1000:ffff0000:0:0:0:
---------------
I would appreciate any help now on how to get the streaming line going ..... ...
OK ... Got it
A typo ...
Yoo hoo ... now for streaming over the internet part....
Bookmarks