This is the hung Screen
This is the hung Screen
Do you get an istallation bar while installing a menu?
I am still figuring out what is wrong and sadly did not any response on former questions.
I only get an installation bar while installing 82F but after that it's just stuck on the welcome screen.
I changed the welcome screen by the way. That worked, the rest didn't.
yes , you are right , i got the installation bar, i have posted the picture of it as well.And after that stuck at the initial screen.
How did you manage to change the initial screen? Kindly let me know.
Also as the material is in warranty ican send it back to the sellerr for replacement.Pleae suggest me if i should wait for the correct firmware or send it back for replacement .
waiting for help eagerly
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
for units not flashing both OS and MENU or in the wrong resolution you need to format the registry....use the file posted earlier or if possible do it this way.
Use the Storage Manager in control panel.
Select the partion ( Of the four partitions it is the smallest one!!)
Select properties
Dismount
Format
Power off unit
put update files on card
Power unit back on
let it update OS (yellow line reading then another below writing) then application menu .....it will ask to update ALL say YES (left button if in chinese)
update menu......reboot.......calibrate....presto....that s how it works when you use the right menu app and os resoultions and dont use the bootloaders!!!
NS
Last edited by NoService; 06-09-10 at 03:10 PM.
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
Well,
in my device the os is installing fine.It also says update ok.
then restarts and stops at the welcome screen.No menu opens atall.
Let me know what to do .
Hi NS (welcome back to the living),
I asked the seller and he confirmed that the system is 82F.
If I update de OS it says 'ok'. But is does nothing, it stops at the welcome screen.
I really tried everything but whatever menu I install, all it says is 'ok' and after a rebout it stops again at the welcome screen.
I cannot even turn it of! Just have to let it die to get it turned of.
Help!!! ghehe
atleast i can switch it off.
Just press and hold the power button for more than a min, it will switch off.
Any how i have decided to send the material back to the seller so that i can get the replacement.
Have you guys tried another ROM file? It happened to me too, and I manage to make it work with a different ROM. Try this one from here:
hallo all.
i want to change the startup logo on : 82AV6/64MB/800×480
how can i make this ?
i have read from yfospa06.img. ist this the Picture for the logo ?
how can i make the img File ?
thanks...
The img file is te OS (Operating system) so that is not the right one.
Just put on a clean SD-card a file that you made yourself in BMP-format.
It has to be 800X480 ofcourse and also put the YFUpdate.exe on the SD-card.
Put the SD-card in the slot and reboot.
When it says 'ok' its good :-)
When nothing chanced, the format of the picture was not ok.
Succes
@ R-S-B
The file name must be "Logo82a4.bmp". It must be in .BMP format with 24-bit colors.
@ shoppy
Did something at least happened with the device? Like: Boot screen -> Read -> Erase -> Write? Or just didn't work at all?
I was just thinking maybe it's something wrong with the menu and it freezes because it can't load it. Try having the .wzp file on the memory card besides the .img and the YFUpdate.exe.
Last edited by dexex; 07-09-10 at 07:45 PM.
del
Last edited by R-S-B; 07-09-10 at 08:03 PM.
@ dexex
thanks. i will test it now....
10min later...:
its going.... great . now i have a new StartLogo.
can you tell me ????
can i use other wzp file in 800x480 with other menu ?
were can i finde.
the last yfapp.wzp here from board i not OK.
It cant save the langage under settings menu.
i have from seller a new wzp file. now i can Save in the settings menu.
sorry my bad englich... i am german... sorry...
It was an orange menu (original) and I wanted to change it in the black menu, for a friend, that I use myself.
But when I put the 82F menu on it, it just bricked.
It just shows the welcome screen and thats it.
Later when I put the 82F OS on it, it gave the bars: Read -> Erase -> Write.
But only with the 82F not with others!
Tried allso several menu's but with no luck.
Last edited by shoppy; 07-09-10 at 08:40 PM.
@shoppy
i have test the black menu on my device. it look great on an 480x272 device.
hehe it rearly funny. 480x272 on an device for 800x480pcx.
it to small but it works...
now i have update with the right rom file in 800x480.
its now all ok.
thank you for yor help....
the logo is now my own.
Ok peoples lets get this clear
YOU CANT USE ANY ROM FILE......it must be in the resolution of your unit.....if you look back thru the posts you will see there are 480x272 and 480x800 ce roms already posted......YFOSPA06.img ..these are CE6 ROMS!! do not attempt to use them on CE5.
MENU MUST ALSO BE THE RIGHT RES.....make sure you download the correct resolution menu app (YFAPP) for your unit.....some are RAM specific to so be careful and as always if its working now leave it that way!
If you have inadvertantly flashed the wrong image reflash the correct one
If you have flashed the wrong Menu.....you must format registry because the previous (wrong) menu has written in the reg that your res is now xxx.xxx now your unit will not accept any other res apart from that......formatting and erasing the registry is the only way to get past this.
there are two ways...as above and using the two files posted earlier.
NS
Last edited by NoService; 07-09-10 at 10:12 PM.
The Early Bird May Get The Worm But Its The Second Mouse That Gets The Cheese!
Bookmarks