hello
i want change that splash image , i hate windmill´s
enyone can help me !!!
my device is a chinese Gps with:
Rom Version pm82.a.1208
S.version: V3.0.12.8
OEM info: MStar
thanks
Hi Bazzle,
thank you for your hint, but it seems that WinCE Patch does not comply to my AT8X1A-Board. I have read Tutorial thouroghly.
This is the system info of my unit:
Handhold Reference Board A4
AT8X1A 6.0
Windows Embedded CE6.0
50.6MB RAM
ARM1136JF-S AT840
480x272 pixel
I am still not able to change boot image to get rid of this awful speedcar logo.
Logo.bmp in different variations does not work. I believe no bmp-file will do.
Can somebody help?
Any idea will be highly appreciated. BTW: WinCE6 is not accessible.
Japagoda
hello
i want change that splash image , i hate windmill´s
enyone can help me !!!
my device is a chinese Gps with:
Rom Version pm82.a.1208
S.version: V3.0.12.8
OEM info: MStar
thanks
Hello All
Yes i'm new to this kind of Stuff and i tryed to install MioPocket 4.0 and i tosted my GPS and i'm now need a new flash software.
I tryed the 117_nav_en but it has the wrong resolution i need 800x480
it is a win ce 6.0 500Mhz Nanflash and SDram 128Mb Sirf IV
the firmware inside was
MCU: RC04.25
DVD: v04.15
HMI: v05.05
Can anyone help with something that works with the right resolution 800x480
Kind Regards
Plextormand
New 7inch GPS navigation MTK3351
7.0 inch 65k Color TFT display(800*480)touch panel
CPU: MT3351, ARM1176JZ-S Core 468MHz
Operating system Microsoft Wince5.0 Core Version
Memory 128MB SDRAM
High-Sensitivity GPS Engine:
Enhanced Time to First(TTFF)Hardware
Indoor Tracking(-157dBm)
Battery: 850mAh to 950 mAh Li-ion battery(3-3.5 hours operation)
I/O input method stylus pen/software keyboard
High Speed USB2.0
Multimedia: MP3/WMA music player, photo view and movie player(MP4) for multi formats
TMC(optional)
Crystal-Clear 3-D and 2-D Graphics
Channel: Up to 24
Built in Bluetooth and AV-IN
****************************
Hi! this's my GPS,pls sent to me firmware.
Thanks a lot
Last edited by luxubumu; 03-08-11 at 06:03 PM.
little bit of hope today.
had nothing to lose and try to flash with this
.
the device now boot but still go in black screen. i manage a couple of time to have the menu in Chinese but cannot save it. it seems that the navi boot its not dead, just lost the path to NANDflash.
if any body have any idea from here i will appreciate.
thank you to everybody for your time.
My new 6inch Touchscreen GPS Navigator with Bluetooth is bricked.
Product code CVUK-TR29
Processor MT3351 468 MHz
OS: wince 5.0
Resolution 800x480 HD
Firmware Version: V.13M.000000.110616.128M
App Version: V3.0BF-UI 20-HD-EN
System ID-code: 0018E420-09000000
I bricked it when trying to install new start-up logo. Now it starts with new logo and stops with the screen shown in the picture.
It will not do anything else. Can somebody give me a suggestion?
I dont know wether bootloader is defect??
[IMG] Uploaded with [/IMG]
Last edited by japagoda; 04-08-11 at 05:09 AM. Reason: Now image is being displayed.
dimitri (25-12-13)
J need firmware for We-top gps
Rom Version:18.JX.4B.11.7.7
Processor:ARM920T
Sofware Version:2.08
ID:2dabb7a900000087
THANKS
Hey there,
just wondering is there any firmware or any modification for the chinese gps that doesn't lock the screen when it is connected to usb?
My goal is to get the pna charged by my headunit but at the same time my headunit can read mp3 files off the pda.
At the moment even when I run tomtom in it, if I connect the usb cable the pna will start the lock screen and I can't do anything with the pna.
I recently bought on ebay no-name Chinese GPS running MTK YG 912M V2.2.
This is not my first GPS that I unlocked by Miopocked (yes I read someone suggesting not do do it, should have read it sooner), but my problem is I accidentally locked it because I messed up its registry and now unit hangs at splashscreen. I contacted seller and he sent me some files (*.nb0 and *.msk - but after days of reading what I seem to miss is the eboot files which they did not provide).
Now looking online for this type of chip which they seem to update and close production very fast is like looking for a needle in a haystack, so I was thinking since I am going to order a new one from same guy and now is my real question.
Since this unit runs on WIN CE 5.0 is there some program like I found here for WIN CE 6.0 which was created by ablbd please check post
So I can dump on my card eboot and all necessary files which I can use later to reflash my bricked unit. Does any one know this type of program??
Please help because nothing else comes to my mind other than trowing this one in the garbage
All help is highly appreciated
neo-hito,
The easy way is to change from Mass Storage to Activesync; hopefully you have those options either in UI or in control panel. The more complicated option is to "prepare" a special usb cable in which signal wires (D+, D-) are interrupted.
thanks for the reply ablbd!
yes in the end I managed to change the usb to activesync mode by going into the wince's control panel. This let me charge it but then it wont let the headunit access the microSD.. if I change it back to the mass storage the pna can't access the microSD so can't use tomtom.
Basically now I need a way to let both the pna and usb access the sdcard at the same time.
AS mode has nothing to do with microSD access but mode switching in control panel is not a very clean solution unless you reset afterwards. So: set mode to AS from control panel then reset the device. After reboot you should see nand+SD internally and via AS too.
LE: danko, have you looked here?
There are 2 or 3 packeges for YG 912M
Last edited by ablbd; 07-08-11 at 01:41 AM.
danko.ba.nanko (09-08-11)
AS lets the pna see the sd internally but unfortunately the headunit can't read AS, it'll just say USB N/A
Ok, now I understand what you want and all I can say is: forget this combination as it will not work. In mass storage mode if the device connects on usb to whatever other device, the internal resources (nand, sd card) become unavailable for the GPS, so nothing will work on it until usb is disconnected. At least nothing which is supposed to access nand or sd card...
japagoda (07-08-11)
Hi, f2d,
firmware works great right from the beginning. You saved my gadget from the garbage.
I was about to throw it away.
Thank you very much!
japagoda, Germany
Last edited by japagoda; 07-08-11 at 08:49 PM.
Bookmarks