maate, doing that with a universal remote, sheeet! you've got coconuts and a crap load more patience than me
WOW
but that said, well done
Before the crash someone was looking for a remote to adjust the convergence on a similar TV. If you're still looking this may be useful (googling for a replacement remote suggests the same remote was used on many Samsung RPTVs).
I used a One for All URC 7730 universal remote (other One for All remotes will probably work as most of them seem to use the same codes). Code 0618 was the closest code I could find.
Using this code some buttons are not mapped correctly so the convergence options in the function menu can't be used.
It is possible to set the convergence with this remote via the service menu.
Mute, 1, 8, 3 to enter the service menu. This should give you a full screen crosshatch pattern with a crosshair.
Use the 7, 8, 9 keys to select R, G, B.
Use the Mute and AV keys to move the crosshair.
Use the arrow keys to adjust.
Use the RED SP/LP key to exit and save.
Look Here -> |
maate, doing that with a universal remote, sheeet! you've got coconuts and a crap load more patience than me
WOW
but that said, well done
Edit: It's actually the BLUE AUTO key to save settings and the GREEN STOP key to exit. I found that out the hard way when it lost the settings after I powered it down and I had to go through it all again.
Doh! Sometimes I wish they'd go back to whole stack of trimpots.
Bookmarks