NewC$ xml file for ND$

[ozandrew]

Hi

I want to start using a ND$ card in my winXP server. The server is Runing NewC$ with gemini clients.

I need a bit of help with the newC$.xml config file.

Can any one out there help me out please.

[Fernbay]

Have you tried a seach for newcs.xml at all?

Showing results 1 to 25 of 125
Search took 0.29 seconds.

It really has been covered many, many times

[ozandrew]

Have you tried a seach for newcs.xml at all?


It really has been covered many, many times

I have looked and now I am asking nicely.

I have 3 newcs.xml files.
They were used for ir2 v5 cards, v4cards, and one for whitey. I have no idea if there is one or how to configure a file for a new nd$card.

Any help would be apprecited

[z80]

easier if you post what you have tried and we find what the error is.

NO ONE will take the time to do it all.

[ozandrew]

easier if you post what you have tried and we find what the error is.

NO ONE will take the time to do it all.

Here it is:

<newCSconfig>

<readers name="Card Readers">
<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>/com1</node>
<mhz>600</mhz> <!-- or 357 -->
<parity>even</parity>
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<PTShandshake>no</PTShandshake>
<carddetect>no</carddetect>
<newcamd_port>xxxxx</newcamd_port>
<priority>round</priority>
</device>


</readers>


<cache>
<emm>20</emm>
<ecm>1</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>xxxx</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>xxx</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>Lounge</name>
<password>xxxxxx</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
<user>
<name>Shed</name>
<password>xxxxxx</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
<user>
<name>bedroom</name>
<password>xxxxxx</password>
<au>off</au>
<sidoverride>on</sidoverride>
</user>
<user>
<name>Mum</name>
<password>xxxxxx</password>
<au>off</au>
</user>

</newcamdserver>
</newCSconfig>

[warbo]

<node>/com1</node>

should be:

<node>com1</node>

[ozandrew]

<node>/com1</node>

should be:

<node>com1</node>

Thanks , Ill try it out next week.

[STI02]

Guys

Does newcs read nds via a phoenix plugged into the com port ? I didn't think it could. I could be wrong ......

Can someone confirm please...

Thanks

Thanks , Ill try it out next week.

[Fernbay]

Answered many times already...... Try the search button or check your PM's

[streeter75]

I reckon if we advertise that this is still working it will disappear the same as Ird1 + Ird2 + Gamma did...............................

Time to start thinking smartly, and keep info on setups etc to our selves I think

Too many eyes reading we dont want reading etc

[LeroyPatrol]

I reckon if we advertise that this is still working it will disappear the same as Ird1 + Ird2 + Gamma did...............................

Time to start thinking smartly, and keep info on setups etc to our selves I think

Too many eyes reading we dont want reading etc

Unfortunately it's already the case!

Leroy

[SatXpress]

also <ecm>1</ecm> should be <ecm>-1</ecm>

[SatXpress]

and i don't think everyone needs sidoverride set to on?

[Kavakid]

Anyone got a newcs config that will get a Bluey/phoenix to run @ 10Mhz??
I want to overclock the card from 6 to 10mhz but no luck.

I am starting to think I need to use a different newcs release on my LINUX PC.

I am running v1.20 with a Jaycar with a 10 Mhz crystal.

<?xml version="1.0"?>
<newCSconfig>
<readers name="Phoenix">
<device>
<type>phoenix</type>
<mhz>1000</mhz>
<node>/dev/ttyS0</node>
<parity>none</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>No</carddetect>
<newcamd_port>3333</newcamd_port>
<autosid>No</autosid>
<Seca-PPV>No</Seca-PPV>
<priority>round</priority>
</device>


KK

[SatXpress]

I've been told previously that 6mhz max for Blue ND$ cards, any more and there unstable.

[Kavakid]

I will let you know for sure if I can get it going...........

KK