which bit are you having issues with.
You should just need to set your LNB settings, then scan Optus D1.
The transponders are 12456 and 12483, horizontal polarity with a symbol rate of 22500.
If you have specific issues, please post more info
Hey guys, they tell me the experts live in this forum.
How do I set up a Dream Box-518s for Free View NZ, can this be done manually, setup satellites, tansponders etc.
The help from an expert would be perfect
regards
kiwibro111
Look Here -> |
which bit are you having issues with.
You should just need to set your LNB settings, then scan Optus D1.
The transponders are 12456 and 12483, horizontal polarity with a symbol rate of 22500.
If you have specific issues, please post more info
Hey allstarnz.. you dont have a step by step guide do you.
we're having trouble with a DM518, connected to a Sky dish (dual lnb) thats less than a year old.
were using the latest nightly builds of openpli2 but we cant get anything.
do you have a recomended image we sould be using or do you know any tricks..
we've tried following a guide posted by "bartender" in the geekzone site but still not having any luck..
do you have any pointers?
we're newbies and any help would be awesome
best4less (24-07-11)
thanks for that.. but im after more of the specifics for a dm518 / dm500 on freeview in NZ.
weve mastered the art of flashing the thing, and ive had some dm500c's running here on the t/c network..
i have also in the past setup a dm500 with plijade for freeview but that was years a go and i am now having issues with the dm518 and openPLI2..
it could be the openPLI images or the dual LNB dish.. im just not sure..
it would be helpful if we could get a recomended and tested image to download and some settings etc.. once were up and running we should be fine
Allstars posted all you need to setup your DM with the freq's above!
LNB settings are required and are probably the only tricky part if you don't know.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
thanks Leroy..
using those settings hasnt worked.. i suspect that it could be the image im using..
thats why i would like someone to give me a link to a tried and tested image that i can flash it with.. once ive done that i should know if the problem is with the device or what im doing with it..
allstars also said that if youre having a specific problem to post more info..
this is what im trying to do in hope that someone will be able to help..
is it a Sky NZ Dual Throat LNB for D1 and C1/D3dual LNB dish
if so you need to set your LNB L.O. to 10750, 10750, 10750 in the Satellite Configuration Menu and make sure 22khz tone is off so you get Optus D1
if you want to scan and use Optus C1/D3 then turn 22khz tone on
and if that still doesn't help then all the steps are here -
Last edited by Mysterex; 25-07-11 at 09:07 PM. Reason: piccies
follow that geekzone link - all the steps are there for adding both satellites...
thats the guide i was originally using.. ( i think i mentioned that in my first post ). im begining to think that its the openPLI2 images im trying.. they are the nightly builds which i know isnt always the best idea.. but i cant really find anything better to try
I doubt very much it's the image. Here is the older Jade 3 flavours
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Thanks Leroy.. ill give them a go.
you haven't inadvertently zapped the tuner on it have you?
we have it working using openPLI2 212 nightly build but it randomly locks up or drops the channel. if we reboot it its ok again for a while..
does that sound like anything physicaly wrong or a zapped tuner?
will give Jade a try..
Yeh the nightly build images are a bit like beta images. Go one of the images in the link I gave you above.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Try Nabilo Darkstar, it is as good as PLI in appearance and features but more stable.
This image is for DM500 but should be OK for DM518
Just chasing my tail and getting nowhere.
In my last life, I must of been a dog.
Bookmarks