mandc (07-08-11)
Updated firmware is now available for the UltraPlus 980HD/F-9000HD receivers. Fixed is an issue with deleting recorded files and on the 9000 a freezing issue after a few days of continuous use. Also NTFS drives can now be formatted and used and the EPG will be retained if receiver is in standy when a hard drive is installed.
Current Plugins for July:
I thought I would put in a little disclaimer. If your receiver is working fine and you are happy with it then don't feel compelled to update the firmware and plugins. I test with a genuine Austar 4.1 Spongebob and Aurora card when I can. Blue Foxtel cards should work fine as well as most others. eg Canalsat on i701. I rely on feedback whether other cards are working or not but more often than not all works well.
I offer the firmware updates as part of ongoing support for you and hope you enjoy them.
Leroy
Last edited by LeroyPatrol; 07-08-11 at 12:57 PM.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
mandc (07-08-11)
Look Here -> |
sorry to be a pain but the 980 link doesnt seem to work??
the 9000 link is fine tho.
Last edited by LeroyPatrol; 07-08-11 at 01:13 PM.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
steve0 (07-08-11)
all good here on 9000hd with latest firmware, mcas and irdeto cards....
Last edited by hoe; 09-08-11 at 08:37 PM.
LeroyPatrol (09-08-11)
Here is the latest firmware 1.09.35
Enjoy,
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
mkhannah (07-09-11)
Tried loading firmware 1.09.35
now stuck on LD 2.23 SCREEN reflash via rs232?
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Thanks will give it a shot Leroy do I need null modem or standard rs232?
Last edited by oztony; 07-09-11 at 02:04 PM.
oztony (07-09-11)
Thanks again Leroy all good now, and yes a courrupt usb stick the problem
Cheers Tony
LeroyPatrol (08-09-11)
Ok getting " smart card initializing irdeto " with latest firmware and latest MCAS plugin I have selected auo start its a V5 Spongy is it the firmware I have to foll back or the plugin ?
Thanks Tony
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Had to go back to Ultraplus FW ver. 1.08.94 and MCAS_EMU_MCLIENT__20102010 to get picks back not sure what went wrong whats the latest firmware/ MCAS combination running stable on your 980hd Leroy?Have ran out of time have to go to work will play againg tomorrow morning.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Have updated to latest firmware , no problems. It appears to be more stable than the previous one.Using PVR seems to be better, less jumpy when fast forwarding and pausing, but could be just an illusion or wishful thinking.
LeroyPatrol (08-09-11)
Yes did the T0-T14 to T14-T0 thing still no good working all weekend so I give it another go on monday
Bookmarks