Have you tried GBOX
I have recently picked up an old iredeto ci module
tested it out in the dm7000 and it recognises and loads
put my aurora card in it and no pics
so I killed cccam and then I get pics
so it appears that cccam cant use a card in the ci module
and therefore it can't be shared to my other box when used in the ci module
anyone else played with ci modules ?
can they be shared ?
Look Here -> |
Have you tried GBOX
can u post your config please?
I can get aurora(CI) and fox (card sot) working as well
in softcam set fox to cccam and aurora set to none
but when I swap to aurora channel then CCCam is unloaded from memory
and CI module is not shared.. like I started this thread with
I don't think that the Ci can be shared at all
Reality is an invention of my imagination.
ಠ_ಠ
Gidday,
I've got a DM7025 so what happens may not be relevant... however:
I've got a cicam which works for standard aurora card and golide but I've never been able to use the card slots until now.
The new version NewCS 1.16 beta (and Evocamd 2.17) now copes with the golide but not with the standard aurora sub (card version 3.03).
I don't have a current payTV account but if you guys are able to use cccam for this, maybe you could use cccam/NewCS 1.16beta for both fox and goldie?
just a thought
cheers
here u go mate.
SERVER LISTEN PORT : 12000
INFO LISTEN PORT : 16000
HTML INFO LISTEN PORT : 16001
ALLOW WEBINFO: yes
# WEBINFO USERNAME :
# WEBINFO PASSWORD :
# TRY ALL CHIDS : /dev/sci0
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
SHOW TIMING : no
DEBUG : yes
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : no
# SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : /var/keys/Autoroll.Key
STATIC CW FILE : /var/scce/constantcw
CAID IGNORE FILE : /var/keys/CCcam.ignore
LOG WARNINGS : /tmp/warnings.txt
1x Dm7000, 2x Dm500 SD
11-11-11 - NOW PoxBox
------------------------
I may be wrong but i think you need to have a line pointing to the Ci slot ..# TRY ALL CHIDS : /dev/sci0.. points to card reader but /dev/tts/1 or similar will point to Cl slot.
I guess that is the answer dragon - unless I can reference it as a device in /dev/something - there is no way to share it
so there is a /dev/ci and /dev/ca0 - I wonder if I point CCcam at them ?
Will try in my next "gyro gearloose" time
Try this
<newCSconfig>
<readers name="Dbox">
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
I thought /dev/tts/0 thru to /dev/tts/6 were for serial port stuff ?
Reality is an invention of my imagination.
ಠ_ಠ
I found a heap of different newsc configs a while ago which made me think it could here is one referring to 8in1 on db7000
<newCSconfig>
<readers name="SC8">
<device>
<name>Slot 0 on SC8</name>
<type>sc8</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<slot>0</slot>
<parity>odd</parity>
and it goes on with slot 1,2..8.
Fernbay is correct, CI modules cannot be shared. They are a hardware rather than software device.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Sorry guys i miss understood, i thought sharing between CI and CCCam on the same device not between dm700 & dm500 etc....
my wife tell my i have ADHD what would she know shes a bitch and she says shes good at it.
PS: forgot to add my dm500 is up using CCCam while dm7000 using CI watching win etc..
1x Dm7000, 2x Dm500 SD
11-11-11 - NOW PoxBox
------------------------
Bookmarks