Hi
I have a diseqc switch - 2 way. I have the correct settings under user defined sat settings in the dreambox.
Satellite 1 (Optus c1) - LNB0 - A/A
Satellite 2 (Optus d2) - LNB1 - A/B
I manage to tune in the channels (with issues)... but switching is also an issue...basically switching to/from any channels to the C1 is fine...However when tuning into Optus D2 the vertical channels will not load , unless a Optus Horizontal has been browsed to first...this is the same issue in satfind...it wont lock on the frequencies for d2 vertical unless i select a horizontal frequency first (which doesnt have signal)... weird and confused ? so am i...
but this is the second switch ive noticed it with... my 4 way switch works fine... just wondering is this a known issue , is there another solution ??
This switch can also act as a 22khz switch , but has the same issue
C1 - 22 On
D2 - Off..
Ideas ?...
Look Here -> |
Last edited by LeroyPatrol; 28-05-08 at 02:30 PM. Reason: spellen
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
might be a 2 way faulty switch, try different 2 way to test.
while we are on this topic; if I have a universal
Universal Twin
LNC UNI T2
9.75 Ghz
10.6 Ghz
does that mean I have to use 22khz switch ON to get 9.75 and OFF to get 10.6 or have I missed the point completely??
and are these the correct settings for a universal LNB on a dream
LOF/L = 09750
LOF/H = 10600
Threshold = 10700
reason I ask is that when i was trying my 4 way diseq I could not get stable switches between lnb's...
thanks
so does 22khz on give you low or high?
i.e
09750 = 22khz off
10600 = 22hkz on
or is it
09750 = 22hkz on
10600 = 22khz off
or am i way off
and the 22hkz signal just does a frequency switch?
thank-you
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
thanks leroy looks like you have solved a problem i have had for many years... silly me... i never had 22khz ON so it looks like I was using the 9750 side...
thanks for the reply... dont really feel like trying another 2 way switch as this is the second one , different brand... weird... 4 way is fine...will try some other testing...
Has anyone actually tried just a 22Kh switch (Single switch) on a dm500 or 7000s ?
Cheers
Bookmarks