Have a read down this thread.
You may find you have to remove the word 'phoenix' from your SERIAL READER line and or add the line also
TRY ALL CHIDS : /dev/tts/0
Leroy
I just got a phoenix reader today, put the gammar card into the external phoenix reader/programmer, but the reader does not read the card. Only the power light is on, the data light is off.
Does anyone know how to make the reader work for DM500?
Thank you.
I modified the ccam.cfg as following:
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERIAL READER : /dev/tts/0 phoenix
Here is the entitlements:
card reader /dev/sci0
no or unknown card inserted
card reader /dev/tts/0
no or unknown card inserted
Look Here -> |
Have a read down this thread.
You may find you have to remove the word 'phoenix' from your SERIAL READER line and or add the line also
TRY ALL CHIDS : /dev/tts/0
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Thanks Leroy. But it still does not work. Just wonder whether your phoenix reader has two lights, and both of them on when reading. As mine,only power light is on,data light is off. Seems like it is not on data transfer mode.
I was about to ask what type of reader?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
After untick "Don't open serial port", the light can flash once I change the channel. But still cannot watch TV. Check deamboxip:16001,
entitlements:
card reader /dev/sci0
no or unknown card inserted
card reader /dev/tts/0
no or unknown card inserted
Looks like the reader cannot read the card.
My reader is a phoenix programmer.No button on the reader, I think phoenix mode only.
What card and is it in the right way??????
Also the serial lead your using did it come with the programmer or is it an old one you had or brought as all the pins must be straight through.
Cheers
Blade
I am running at 6M, the serial lead comes with the programmer, it works as when I untick "don't open serial port", data light flashes (which means commnuincating the dreambox). I am using the gammar card and in the right way.
I do suspect the programmer may not work with dreambox, as the seller only tested with computer.
Back to basics. Here's my cccam.cfg file
SERIAL READER : /dev/tts/0 phoenix
B: /dev/tts/0 04
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/tts/0
Now did you try this with and without the word phoenix in the serial reader line?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
I have ticked "Don't open serial port", but it still does not work. The data light never flashes when I press any button on remote controller. Looks like not read the card at all.
I will keep trying tomorrow. Thank you very much Blade and Leroy.
Maybe I should post my card reader to somebody who can test for me.
Tried:
SERIAL READER : /dev/tts/0 phoenix(also tried no phoenix)
B: /dev/tts/0 04
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/tts/0
Still not work, when I change the channel, the data light does not flash. Maybe something wrong with the cable.
But when I untick the "Don't open serial port", the data light actually flashes, which means the dreambox does communicate with the card reader.
I will keep trying and update what I did.
Just tested the cable, the cable provided is a strait through cable, just like an extention rs232 cable, connection is ok.
Actullay I am running ccam 2.0.0.5, as I can not update from blue panel, cannot find and down load it, does it matter with this issue.
Reflash image with Nabilo, nice image. But the smart card reader still not work. No difference between the previous image. CCam 2.0.8 still not work.
But I know the RS232 port works fine. Should be the smart card reader problem. Contacting seller....
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Bookmarks