Run CCcam from the console and check error messages.
Has anybody had any luck with the orange f***el nds card in the front slot of a dm500s running cccam 2.09.
No pictures for me. Tried an older blue nds and pictures come up ok.
Thanks.
Look Here -> |
Run CCcam from the console and check error messages.
By reading this, you have already given me control over a tiny slice of your mind
That is the error fails to see card but I can run the same command with a blue and get pictures ok.
BusyBox v1.01 (2007.10.23-19:23+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
root@dreambox:/var/bin> CCcam_2.0.9 -dv
11:36:43.767 CCcam: ================================================== ==========
==========
11:36:43.769 CCcam: starting CCcam 2.0.9 compiled on May 17 2008@15:55:36
11:36:43.770 CCcam: ================================================== ==========
==========
11:36:43.771 CCcam: online using nodeId 45d72388b8ee224f
11:36:43.817 CCcam: dvb api1 detected
11:36:43.820 CCcam: DM56xx/500/600 detected
11:36:43.820 CCcam: create 2 cam device(s)
11:36:44.112 CCcam: card init fail
11:36:44.602 CCcam: card detect fail
11:36:44.603 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
11:36:44.604 CCcam: readKeyfile: cannot open /var/keys/Autoroll.Key or not found
11:36:44.604 CCcam: static cw not found or bad
11:36:44.605 CCcam: parsed 0 entries from /var/etc/CCcam.prio
11:36:44.605 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or no
t found
11:36:44.606 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or n
ot found
11:36:44.607 CCcam: server started on port 12000
11:36:44.612 CCcam: found nds caid: 0x96c ecmpid: 0x14ca id: 0x0
11:36:44.613 CCcam: found nds caid: 0x90b ecmpid: 0x14ca id: 0x0
11:36:44.614 CCcam: found irdeto caid: 0x624 ecmpid: 0x14fc id: 0x0
11:36:44.614 CCcam: found irdeto caid: 0x604 ecmpid: 0x14fc id: 0x0
11:36:44.615 CCcam: cam[0] set PMT for sid=138e
11:36:44.618 CCcam: start EMM
11:36:44.820 CCcam: EMM demux 1 set
11:36:44.821 CCcam: EMM: not interested in 096C:000000
11:36:44.821 CCcam: EMM: not interested in 090B:000000
11:36:44.822 CCcam: EMM: start filter on irdeto emmpid: 0x3ea caid: 0x624 id: 0x
0
11:36:44.823 CCcam: EMM: start filter on irdeto emmpid: 0x3ea caid: 0x604 id: 0x
0
11:36:44.892 CCcam: card init fail
Seems like hd in the new dm800 etc might be an issue. I have hd now but they still havent turned on the channels. I don't mind the iq2 but prefer the dreams if they will work. I have both cards too. I might do some tests. Anything anyone can recommend to test apart from console messages? I know newcs just says "not ok". I'm afraid I dont really know what I should be looking for as far as errors go.
Oh well, looking at it, it seems to at least init with newcs but it takes a few restarts etc and seems flakey. Might be just be me...I aint no expert I just like watching telly.
I notice these orange ones are nds p2 cards. I did a search and there are some german sites listing the features of radegast v4 or so with nds p2 support at 3.56 mhz I think. I know my setup is running 6mhz.
I have a huuuge disk in my dm. Jeez how am I going to tell the missus she cant record a billion hours of star trek anymore? LOL
newcs has a debug console. In the console you can change output debug levels so it spits out more data. Enabled console from within the newcs xml config file.
You should give radegast a shot first if it claims to support it. Also try with NewCS/CCcam at 3.56mHz.
By reading this, you have already given me control over a tiny slice of your mind
I did log into the console and set level to spam and type to all. just keeps repeating the last line checking Sid.
Welcome to the NewCS console
-> [ 09:00:24 ] [ Newcamd:15050 ] User dummy2 logged in, client: Mgcamd
[ 09:00:25 ] [ Newcamd ] ECM -> dummy2 (NOT OK)
[ 09:00:28 ] [ Newcamd ] ECM -> dummy2 (NOT OK)
[ 09:00:25 ] [ Newcamd ] ECM -> dummy2 (NOT OK)
[ 09:00:28 ] [ Newcamd ] ECM -> dummy2 (NOT OK)
[ 09:00:25 ] [ Newcamd ] ECM -> dummy2 (NOT OK)
[ 09:00:28 ] [ Newcamd ] ECM -> dummy2 (NOT OK)
Unknown command, use help to find the exact command..
-> cards
cards
.------------------------------------------------------------------------------- -------------------------.
| Status | CAID | Enabled | Exported | Mhz | PTS | Resets | Ecms | Node | Reader |
|----------|------|---------|----------|-----|-----|---------|----------|------- ----------|--------------'
| Inserted | 096C | Yes | Yes | 357 | No | 0 | 2 | / dev/tts/0 | 0 (Phoenix on Com1)
'------------------------------------------------------------------------------- ----------'---- --- -- - -
-> keys
keys
-> level spam
level spam
Setting loglevel to: spam
-> [ 0929 ] [ SID ] Checking for SID 0FA5 for Reader 0 (Phoenix on Com1) - S O is: 0
so orange card ? is that with HD on IQ2 ?
better stick with bluey until we sort that them
Just tired Newcs win32 as server and connected with CCcam ok with blue nds. Tried again with orange and no go....all it says is dummy not ok in server console. dummy being the user.
Thats orange card from one of my standard IQ's I also have a standard box and that card (blue) works fine in the dream. I also have HD but they havent enabled the HD channels yet anyway, and its also an orange card so I cant be naffed plugging it into my dream. What a pity eh, I was looking foward to hd on the new dm800 etc. Oh well saves me some money on Iq and Iq2 boxes that were just going to sit in the corner.
Anybody have any experience setting up a radegast server? If so can it run on win32?
Can you guys try CCcam as the server?
Maybe try and install CCcam 2.09 and then modify cccam.cfg in var/etc or usr/etc to have only this line in it.
TRY ALL CHIDS : /dev/sci0
(If running in the dreams slot)
so danmc - I got a bluey for both my normal stb and my IQ
have you had the bluey changed to an orange one recently for the IQ or you gor the orange one from the beginning?
I had a blue standard box for ages and got sick of fighting the kids, so when I upgraded to HD I also got 2 extra IQ boxes plus kept the standard (tho I was going to upgrade the standard it just lucked out that I didn't). So orange cards were delivered with iq2 boxes this month.
Thanks Sanity, read that about the p2. Not sure what to think about it though. I did slip and jam it into my standard box by mistake I think but it still seems to work.
thanks for info sanity and danmc
Ok sorry, slightly ambiguous _ I meant that I stuck it (orange) in the standard box and it still worked afterwards when I put it back in its proper iq box. But no, it told me that it was the wrong card and same for the blue in the iq box.
I slip and jam stuff where its not spose to go a lot.
Bookmarks