Short answer yes it can be done, by using a device called an Elsima. Its a transmitter / receiver device.
Long answer... If you want your detectors in the shed hard wired, buy a small stand alone panel, if your using a D16 at the moment, get an Eco 8 panel from Ness, 8 zone, cheap, super easy to install and program. Same functionality as the D16.
Wire up your shed as per normal, use an aux output from the Eco 8 into the transmitter of the Elsima. Wire up the reciever of the Elsima into a spare zone on the D16, you will need to put in an EOL resistor at the D16 end.
When your shed go's into alarm it will trigger the aux output, activating the Elsima and coming up as an alarm on the D16. The only draw back of this, is the shed is effectively one zone on your D16, it wont report individual zones from the shed. However the Eco 8 keypad in the shed will tell you what zones have been activated.
A pretty easy and simple way of doing it and not having to worry about lots of wireless detectors
Bookmarks