-
Hills Reliance Remote Kit S1890A Programming Help
With the Hills Reliance Remote Kit (Activor) DAS No. S1890A.
Does anybody know how to program button 3 to arm partition 2 and button 4 to disarm partition 2.
cheers
Michael
-
Button 3 & 4 control the 2 relays on the receiver. Connect the relays to zones on the panel program the zones as keyswitch zones and put the zone into the area you want to control.
Junior Member
- Rep Power
- 0
- Reputation
- 10
Having a problem with my S1890A remote kit. The FOBS buttons 3 and 4 work well still , but buttons 1 and 2 stopped working on all FOBS. These buttons are for arming area 1. I lost my instruction leaflet to help me out here so if anyone has an idea on how to get buttons 1 and 2 going again please help. I am thinking a feature may have been changed and I am not sure which ??.
Junior Member
- Rep Power
- 0
- Reputation
- 10
Thanks bet2win...I did actually end up finding this about 2 hours ago and thought I would get back here to let you know, As it urns out the receiver is faulty. The coms is down and brings up a communications fault on my reliance128. I still have thw 2 relays working so I can open the gate and garage. Unfortunately the 2 buttons 1 and 2 are useless and I had to remove the comms Green cable to the receiver so I don't have the fault up.\
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks