Results 1 to 5 of 5

Thread: Hills Reliance Remote Kit S1890A Programming Help

  1. #1
    Member
    Join Date
    May 2010
    Posts
    409
    Thanks
    15
    Thanked 100 Times in 80 Posts
    Rep Power
    200
    Reputation
    893

    Default Hills Reliance Remote Kit S1890A Programming Help

    With the Hills Reliance Remote Kit (Activor) DAS No. S1890A.

    Does anybody know how to program button 3 to arm partition 2 and button 4 to disarm partition 2.

    cheers
    Michael



Look Here ->
  • #2
    Member
    Join Date
    Jan 2008
    Location
    Melbourne
    Posts
    370
    Thanks
    1
    Thanked 46 Times in 42 Posts
    Rep Power
    220
    Reputation
    596

    Default

    Button 3 & 4 control the 2 relays on the receiver. Connect the relays to zones on the panel program the zones as keyswitch zones and put the zone into the area you want to control.

  • #3
    Junior Member
    Join Date
    Mar 2013
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Having a problem with my S1890A remote kit. The FOBS buttons 3 and 4 work well still , but buttons 1 and 2 stopped working on all FOBS. These buttons are for arming area 1. I lost my instruction leaflet to help me out here so if anyone has an idea on how to get buttons 1 and 2 going again please help. I am thinking a feature may have been changed and I am not sure which ??.

  • #4
    Member
    Join Date
    May 2010
    Posts
    409
    Thanks
    15
    Thanked 100 Times in 80 Posts
    Rep Power
    200
    Reputation
    893

    Default

    manual here -->

  • #5
    Junior Member
    Join Date
    Mar 2013
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Thanks bet2win...I did actually end up finding this about 2 hours ago and thought I would get back here to let you know, As it urns out the receiver is faulty. The coms is down and brings up a communications fault on my reliance128. I still have thw 2 relays working so I can open the gate and garage. Unfortunately the 2 buttons 1 and 2 are useless and I had to remove the comms Green cable to the receiver so I don't have the fault up.\

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •