Results 1 to 7 of 7

Thread: solution 16 plus relay output4 help

  1. #1
    Junior Member
    Join Date
    Feb 2008
    Age
    51
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default solution 16 plus relay output4 help

    was wondering if i was to use the solution 16plus onboard relay output 4 to output for an electric door strike with the rf receiver and key fob, is there another spot to put the currnt screamer that is currently useing that output?
    can it be put in series with the strobe or horn? what options are there other than output 4, not really wanting to buy the cm110 just for 1 extra output??



Look Here ->
  • #2
    Senior Member
    downunderdan's Avatar
    Join Date
    Sep 2008
    Location
    Sydney Metropolitan
    Posts
    2,497
    Thanks
    163
    Thanked 601 Times in 422 Posts
    Rep Power
    365
    Reputation
    4649

    Default

    You are doing it wrong and I think you'll be buying another Solution 16+ board pretty shortly...

    Wiring it in series with the strobe? You want your screamer to sound for 8 hours after an alarm? In series with a horn? You want it to sound like a goat bleating?

  • #3
    Junior Member
    Join Date
    Feb 2008
    Age
    51
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    i fugured that this would be the case, so what other way is there downunderdan,
    if i use output 4 where can we put the screamer?

  • #4
    Senior Member secure's Avatar
    Join Date
    Jan 2008
    Location
    W.A
    Posts
    907
    Thanks
    156
    Thanked 146 Times in 133 Posts
    Rep Power
    276
    Reputation
    2409

    Default

    What about output 3 if you not using it for smoke reset.
    Put default output 4 settings for Int siren into output 3. You will also need to put a 3k3 resistor across the output, as it is a supervised output otherwise you will hear a slight siren noise constantly from int siren.

    Or change horn siren to voltage siren and change output 1 settings and put both ext and int sirens on output 1.

  • #5
    Junior Member
    Join Date
    Feb 2008
    Age
    51
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    hey secure, what settings do i need to change for output 1 for a voltage siren?
    and when you say to put a 3k3 resistor across the output, do you mean run it in line or in series with the screamer?

  • #6
    Senior Member secure's Avatar
    Join Date
    Jan 2008
    Location
    W.A
    Posts
    907
    Thanks
    156
    Thanked 146 Times in 133 Posts
    Rep Power
    276
    Reputation
    2409

    Default

    Quote Originally Posted by joecub View Post
    hey secure, what settings do i need to change for output 1 for a voltage siren?
    and when you say to put a 3k3 resistor across the output, do you mean run it in line or in series with the screamer?
    You need to physically change the horn siren to a voltage siren, then copy the settings that output 4 had for the int siren and program them into output 1. The resistor will go across output + and -. The output programming is listed in the manual.

  • #7
    Junior Member
    Join Date
    Feb 2008
    Age
    51
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Thanks secure! I got it now that makes sence. Thank again

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •