GPS CE 6.0 Rescue Disk

[jwoegerbauer]

I made a quick compilation of well known start-routines to be run from device's SD-card if device boots up. You might use this if your device has been bricked for any reasons, but device still detects SD-card.


How to:

Extract .ZIP to your desktop pc. Do NOT extract to sd-card!

Edit with Notepad all files with extension .INI and/or .INF, means add a single line such as

<Storage Card>\Autorun.exe

where you replace <Storage Card> with the card's real name used be CE, ex. "\SDMMC" (without the quotes of course)

Copy content (!!!) of (extracted) .ZIP to root of any freshly FAT-32 formatted sd-card.

Power off device.

Insert sd-card.

Power on device.

>> With some luck you should have access to device's OS.

HTH


P.S.

It should be easy to extend contents of this compilation to match your needs.

[amirz999]

sir,
I've done what you said and finally I got access to Regedit.exe (so tnx). now, I have problem editing the string I want because I can't access keyboard in the regedit application and cedesktop.exe can't also get executed. Can you help with keyboard problem ??
thank you

[Dregor19]

I made a quick compilation of well known start-routines to be run from device's SD-card if device boots up. You might use this if your device has been bricked for any reasons, but device still detects SD-card.


How to:

Extract .ZIP to your desktop pc. Do NOT extract to sd-card!

Edit with Notepad all files with extension .INI and/or .INF, means add a single line such as

<Storage Card>\Autorun.exe

where you replace <Storage Card> with the card's real name used be CE, ex. "\SDMMC" (without the quotes of course)

Copy content (!!!) of (extracted) .ZIP to root of any freshly FAT-32 formatted sd-card.

Power off device.

Insert sd-card.

Power on device.

>> With some luck you should have access to device's OS.

HTH


P.S.

It should be easy to extend contents of this compilation to match your needs.

Edit with Notepad all files with extension .INI and/or .INF, means add a single line such as

<Storage Card>\Autorun.exe
what ai write in the file with .ini or inf?sory i don`t understand

[jwoegerbauer]

Edit with Notepad all files with extension .INI and/or .INF, means add a single line such as

<Storage Card>\Autorun.exe
what ai write in the file with .ini or inf?sory i don`t understand

Wasn't aware it'ld be so difficult to understand.

You have to add in files with extension .INI / .INF ( as there are shell, YFAutorun, Autorun ) a line that finally might read as \SDMMC\Autorun.exe.

Important: \SDMMC used above only is an example! You must use SD-card's name as Windows CE uses, i.e. the SD-card's name hard-coded in Windows CE.


If you don't know which name Windows CE uses for the SD-card, aside SDMMC used above in the example, you can try these well known names, too

Storage Card
SDCard
SD Card
SDMemory
SDMemory1
SDHCMemory
MMC
HSMMC

etc. pp

[thegrnseed]

thanks

[boyam99]

Does it work with win ce 5?

[tristen]

The author of the software is no longer a member here.

Why not try it to see if it will run under CE5?

It's not rocket science. It either runs or it doesn't

[boyam99]

The author of the software is no longer a member here.

Why not try it to see if it will run under CE5?

It's not rocket science. It either runs or it doesn't

you lost your brain

[WhiteOx]

you lost your brain

I can see your stay here will be a short one.

[mtv]

Repeatedly insulting staff after a warning and infraction... very stupid.