TurboPirate (09-05-17)
TurboPirate (09-05-17)
Yes, it worked with PV with SoftCam I loaded, as far as I know the SoftCam didn't have EMM keys and when keys rolled the X5 never open that channel until I fix the SoftCam with new keys, I get new keys from my GLOBO HD405, the X5 it has Firmware from AlphaBox, when receiver boots the boot image is AlphaBox, is the only firmware that fixes the SID problem.
"There is no way to peace, peace is the only way." Author: A.J. Muste
"There are no stupid questions, only stupids that don't ask" Author: Me
Test: GLOBO HD405, FreeSat V7, V7 Max, V8 Super, DVB World HD, SkyBox F3, AZlink V3 HD
IPTV: Android and MAG.
KD_P9000E_HD_ALPHABOX_DRE_PowerVu_2015_07_31
That is the firmware it has right now..............
"There is no way to peace, peace is the only way." Author: A.J. Muste
"There are no stupid questions, only stupids that don't ask" Author: Me
Test: GLOBO HD405, FreeSat V7, V7 Max, V8 Super, DVB World HD, SkyBox F3, AZlink V3 HD
IPTV: Android and MAG.
TurboPirate (10-05-17)
Thanks, I will try it now, just to be clear, the X5 still works with PID numbers? I have to enter same ECM Keys for each channel on a single TP?
"There is no way to peace, peace is the only way." Author: A.J. Muste
"There are no stupid questions, only stupids that don't ask" Author: Me
Test: GLOBO HD405, FreeSat V7, V7 Max, V8 Super, DVB World HD, SkyBox F3, AZlink V3 HD
IPTV: Android and MAG.
Hi, does any have powerVu firmware for the X5pro/Super/+ (KD_P9550E_HD_OPENBOX_X5pro) ?. Been looking but but not found any so far, it mayt not of been patched but it sure would breath life back into the reciever
As far as I know the OpenBox X5 firmware worked with all the X5 models like X5 Pro, X5+ unless it was the second Version of the X5 that used a different firmware than version 1, maybe you can try loading this firmware and if it doesn't work you can do recovery via serial port RS232, I have recovered a few X5 that were loaded with Q Sat firmware by owners that think when a receiver has the same Sunplus Chip it can be loaded with any file with the same chip.
"There is no way to peace, peace is the only way." Author: A.J. Muste
"There are no stupid questions, only stupids that don't ask" Author: Me
Test: GLOBO HD405, FreeSat V7, V7 Max, V8 Super, DVB World HD, SkyBox F3, AZlink V3 HD
IPTV: Android and MAG.
Thanks but it doesn't load as the product ID is different it fails to load via firmware update menu not to keen to do a recovery install
"There is no way to peace, peace is the only way." Author: A.J. Muste
"There are no stupid questions, only stupids that don't ask" Author: Me
Test: GLOBO HD405, FreeSat V7, V7 Max, V8 Super, DVB World HD, SkyBox F3, AZlink V3 HD
IPTV: Android and MAG.
No not yet what is the worst that could happen if it fails ? can I recover it just by loading the correct firmware the same way ?
It is suppose to recover same way, do you have computer desktop with a real serial Port RS232?
"There is no way to peace, peace is the only way." Author: A.J. Muste
"There are no stupid questions, only stupids that don't ask" Author: Me
Test: GLOBO HD405, FreeSat V7, V7 Max, V8 Super, DVB World HD, SkyBox F3, AZlink V3 HD
IPTV: Android and MAG.
I need help how to set up a freesat v7 to recieve AFN on I 19 I have a freesat V7
What do want to know. I have a combo and get channels on Intelsat 19 cband with a 2.3m dish in Brisbane
Cheers, Saintaholic
I saw on a forum that you need a new firmware for version 2.4.4 powervu yesterday.
I will try and find the post make sure they basically said it's Powervu V3
IF EVOLUTION WORKS, WHY SO MANY IDIOTS?
Bookmarks