MOTONAV TN30 stuck on blue screen

[juliocedeno]

Hi members, I need help to recover a MOTONAV TN30, after installing MioPocket he stayed with blue screen and a red X, appreciation in advance for your comments. Regards.

[jwoegerbauer]

The device is based on Windows CE 5.0 Core, so it should be possible to hard-reset is, means reset it to its factory defaults. Already tried this?

[juliocedeno]

I have not, I need information on how to do, please.

[jwoegerbauer]

[juliocedeno]

thanks, but I do not have access to the GPS menu, then, to turn it goes straight to a blue screen with a red X in the center and stays there

[jwoegerbauer]

Can you access Windows CE, means have already tried ?

If this works, then you - in a further step - can programmatically hard-reset the device.

[juliocedeno]

1. I format the sdcard and rename as SDMMC
2. Edit the .inf and .ini with \ SDMMC \ Autorun.exe
3. Power off gps. Insert sd-card. Power on gps, it goes straight to a blue screen with a red X in the center
please, I've done the right thing?

[jwoegerbauer]

1. I format the sdcard and rename as SDMMC

You haven't correctly read the lines

Edit with Notepad all files with extension .INI and/or .INF, means add a single line such as

<Storage Card>\Autorun.exe

where you replace <Storage Card> with the card's real name used be CE

It's not of interest how you name the SD-card (volume name), but how Windows CE calls it (this is hard-coded in Windows CE).

Examples: SDCARD, SDMemory, SDMemory1, SDHCMemory, MMC, SDMMC, HSMMC, and so on ...

[juliocedeno]

1. already corrected, edit the .inf and .ini with only < \Autorun.exe >, so be fine?
2. power off gps. Insert sd-card. Power on gps, it goes straight to a blue screen with a red X in the center