heres a sales contact for AVTECH - gerges.garas@avtech.com.tw
I recently upgraded the cameras on a system to TVI and one of the cameras was also used as part of the intercom/door bell system. Each camera just had one coax cable going to the camera and the front gate camera's output was split with one signal going to the DVR and the other to the intercom/door bell monitor.
The intercom/door bell monitor requires an old analogue signal and while the DVR is happy with the new TVI camera, I need an old analogue signal as well. The camera has an analogue output, but as there is just one coax running out to the camera (and it's a very long run to the gate) I am just using the TVI feed.
I'd like to take the TVI feed that is going to the DVR, split it and convert one of the splits into analogue. The closest device I could find that would do this is this one: but it's not easily available.
What other options would you guys recommend?
Thanks,
ambanmba
Look Here -> |
heres a sales contact for AVTECH - gerges.garas@avtech.com.tw
Banned
This thread is over a year old and the OP only made that one post.
Closed
Bookmarks