Change Installer Code on Reliance R12

[Chronos]

Hi all,
Im sure this has been asked many times before however i cannot seem to find any thread.

Can someone please help/tell me how to change the installer code on my Reliance R12 with Hills TouchNav Code Pad.
I have/know the current installer code but want this changed as it was a friend of mine who installed the system and now we dont even remotely get along and i fear he will do something to my house so need/want it changed.

Hoping someone can tell me how to do this, thanks in advance to all.

Cheers

[techy21]

Ok
1. Enter the following press * button then press button number 8
2.enter the current installer code then press 0 button then press # button
3. Now press 1 then # button
4. Now enter code ie 3456 by this way press 3 then press * then 4 * then 5 * then 6 *
5. Then press exit exit exit
wait 30 seconeds all done

[PANDATECH]

Thanks to techy21 for stepping up

[shadow1987]

Thanks to techy21 for stepping up

Lol that won't work on touchnav!

Menu
Settings
Installer pin (known pin)
Program
0 enter
1 enter
9 enter, 7 enter, 1 enter, 3 enter ( new pin example)
Exit (wait)

[PANDATECH]

Thanks to shadow1987 for stepping up and correcting techy21.

[Chronos]

Thanks for your help guys, i really appreciate it.
Im not home until Wednesday so will give it a go then.

[Chronos]

PERFECT!!! Thanks so much for your help!!

[meeks1992]

Lol that won't work on touchnav!

Menu
Settings
Installer pin (known pin)
Program
0 enter
1 enter
9 enter, 7 enter, 1 enter, 3 enter ( new pin example)
Exit (wait)

Hi Shadow1987

Is there a chance you might know how to do this with a VoiceNav panel?

Many thanks in advance,
Maurice

[shadow1987]

A little difficult to explain here! Easier to get an led KP and use that then swap back to voice nav.