It depends on what LNB and cabling have been installed and which Foxtel decoder you intend to use.
Most Foxtel channels use horizontal transponders and VAST uses vertical transponders.
A splitter can only operate on one voltage at a time, so you can either have vertical or horizontal selection of the LNB polarity, so unless you want to be switching cables each time you change from VAST to Foxtel, you need a dual output LNB with a cable to each decoder, or if you have Foxtel iQ/iQHD, you will also need a multiswitch with two cables to the iQ box and a separate cable to the VAST decoder.
Bookmarks