If a convergence IC has failed shorted it can cause power supply to shutdown. I had a Philips set do this. Try removing the convergence ICs and see if it starts up?
I have a Samsung SP-43Q5hL ( Rear Pro )with No Power
the customer said that the convergence was out
but as soon as I get it back to the
work bench it wont even startup
Does any one know how to turn the
protection off on these suckers
Or do you know if the convergence ic's can
cause the protection to kick in.
cheers
When you do things right, people won't be sure that you have done anything at all
Look Here -> |
If a convergence IC has failed shorted it can cause power supply to shutdown. I had a Philips set do this. Try removing the convergence ICs and see if it starts up?
We got one this week.DEAD with a whistle.
Replace both chips.
Heres the good bit.If one pair of 3.9 ohm resistors is open, it wrecks your new chips.
Sweet thanks for the heads up
I will check them in the morning
cheers
When you do things right, people won't be sure that you have done anything at all
Bookmarks