I think you'll find Irdeto 1 is not supported with newCS. Do a search for irdeto 1 softcams as this was discussed recently.
Leroy
I have my front slot reading a Goldcard. Problem is is wont AU. Tends to last for hours then nothing. I bang it in the Strong for 30sec and throw it back in the DM500. Works until next rollout. Is there a setting I have wrong in my cfg:
newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>Sci</type>
<node>/dev/sci0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
<device>
<name>upper</name>
<type>Sci</type>
<node>/dev/sci1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
Cheers, Saintaholic
Look Here -> |
I think you'll find Irdeto 1 is not supported with newCS. Do a search for irdeto 1 softcams as this was discussed recently.
Leroy
The cards works fine. Just doesn't update (unless that's what you were referring to)
My softcam/Autoupdate files for some reason are not working. They just stopped one day (2weeks ago) The only way at the moment I can get Irdeto1 is via Goldcard. The PMK in the Goldie is the same as Autoupdate.key file. Cant figure why it doesn't work. They are attr 755
Cheers, Saintaholic
isnt the goldcard bad for the internal slot of dreamboxes ??
I have had no luck with the internal slot and the goldie using CCcam and Newcs
I have tried CCcam with a phoenix which works for several hours,then freezes.
Greywolf as Server and CCcam is the same with freezing problems.
Possibly due to my configs being incorrect,or need fine tuning.
Newcamd 6.10 with internal keys seems to be the most stable way for me.
CCcam 1.71 and 2.00
Scam 2.39
work perfect on my 500's
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
just use an ir2 aurora card.
works with any emu.
Using these emus standalone or with newcs onboard the 500?
Not having any luck here with CCcam 2.0, I have quite a few 500's with blown network adapters, I could use the front slot working with a goldies !!
KK
stand alone of course
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
Reflashed a 500 from Gemini to Jade, installed cccam 1.71.
Had pics off goldie in slot for 30 secs then froze.
It's a start !
KK
Bookmarks