Camkey problem
Can somebody please help me?
I have a DM500 --> @ Optus C1.
I have a genuine Epsilon V5 (4105 xxxx xxx series) activated on FTA Channels except 7.
I can read the card details in Cccam 2.0.9 with the internal reader, however, although the 'I' in the OSD info goes from Yellow to Green I have no audio or video. The card works in my old Echostar with Irdeto Purple Cam (904505 Rev1.1).
I can get no details at all from the card in the Jaycar MkII. The reader is present in the Card Info sticky.
I, to the best of my abilities, have eliminated a build (or other) problem with the MkII. It can read the details of the card using FMcard V4.0 through the serial port (same serial cable) on my PC.
Stumped!
Any Idea's please?
Thanks in Advance
upgrading to Premium soon LOL
Look Here -> |
Camkey problem
I started with a blank CCcam.cfg and got the same sympton with the green "I" but no pics
so I added these lines and got pics straight away
sharing has gotta be easier with CCcamCode:CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00
your mileage may vary
z1gg33 (03-09-09)
Thanks for the the reply.
That worked straight away. Thank you so much.
Any advice on how to share that card now with my HTPC in the lounge would be great. S*y very kindly install a dish with a dual horn lnb :-)
Thanks very much.
upgrading to Premium soon LOL
upgrading to Premium soon LOL
you do need a few more lines in cccam.cfg to run a jaycar on serial
for my phoenix I use these - I dont know what a jaycar needs..
Code:SMARTCARD CLOCK FREQUENCY: /dev/tts/0 6000000 SERIAL READER : /dev/tts/0 phoenix PHOENIX READER PATH : /dev/tts/0 CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
This config worked for a NDS in the slot and Mr White in the Jaycar.
Code:SERIAL READER : /dev/tts/0 phoenix B: /dev/tts/0 04 CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00 CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 TRY ALL CHIDS : /dev/tts/0 CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes) CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes) TRY ALL CHIDS : /dev/sci0 SMARTCARD CLOCK FREQUENCY: /dev/sci0 7800000
z1gg33 (03-09-09)
upgrading to Premium soon LOL
Mine has been going like that for months....it hasn't burnt out yet. Perhaps I need to drop it.
My card was a very new one.. nds3 perhaps.. it burned as soon as it went in the DM.. it also dead shorts the jaycar (very dim leds) as soon as its pushed in... so if yours has been running for a long time without heat issue's i probably wouldnt be too concerned.
Trying that new config for the jaycar now.
upgrading to Premium soon LOL
I entered the settings you gave me from your own config, only changing the clock speed of the card back to 6Mhz and the jaycar negotiated immediately with the Epsilon. Thankyou very much... I appreciate all the help.
Interested as to what this line is? something for sharing?
B: /dev/tts/0 04
upgrading to Premium soon LOL
I can't find it in my notes at present but from memory I think the B line stopped the updates. If/when I find the info I will correct this post.
don't worry about ignoring C0 packets anymore.
so is it ok to remove that line?
I want to set up a share with the htpc in the lounge now i have the card talking. I am using mediaportal. I have installed Newcs on Pli Jade on the DM. what s/w would be best to run on the PC to share the cards and what lines to what configs do i need start the share working. Using a standard 192.168 style network.
Thanks in Advance
upgrading to Premium soon LOL
yeah...remove it unless you have a working austar/gamma card
Bookmarks