Image for CLONE DM800

[wombat]

Hi all,

Pls use this thread to suggest the (best) images to use for a CLONE DM800
cheers

[angusc]

Hi all,

Pls use this thread to suggest the (best) images to use for a CLONE DM800
cheers

The Nabilosat BH v0.7 that i posted in an earlier thread. Nabilosat team have assured all CLONE users that they will not attack clone machines. Just be careful with any other softwares and pluggins that you might upload as they may not follow the same views. (such as Barry Allen)

[angusc]

The Nabilosat BH v0.7 that i posted in an earlier thread. Nabilosat team have assured all CLONE users that they will not attack clone machines. Just be careful with any other softwares and pluggins that you might upload as they may not follow the same views. (such as Barry Allen)

I have to take that back.....I just read up on the Nabilosat site and you can not use the image with the secondstage boot loader #70 on a clone box, it won't harm your box but will hang on start up. There are ways around this aparently here: h__p://www.nabilosat.info/forum/showthread.php?t=64156

[remote]

For multiboot, use nabilosat pureflash dated 11dec...it installs barryallen.. then you can install latest versions on hard disk..blackhole 06 and 07..and 08

other images I have working on hard disk.
Boxman
Dreamforum II
Newnigma2
OozooN-CVS
I have tried PLI and gemini ,but no go
LT-Fifth, but crashes when trying to change video settings..

[jonc]

Any software image mentioned above or otherwise with bootloader #70 and above is effected (listen to me not, your choice) with the clone detector (not killer).

[wombat]

Any software image mentioned above or otherwise with bootloader #70 and above is effected (listen to me not, your choice) with the clone detector (not killer).

Thanks to all.

@jonc
I understand the 1st bit: Any software image mentioned above

but the 2nd bit is a riddle 2 me:
otherwise with bootloader #70 and above is effected (listen to me not, your choice) with the clone detector (not killer).

can u pls explain, cheers

[jonc]

as it says, if your firmware uses bootloader 70 and above (as all the new images do above in 2009) which you will see in their release note, you will be subject to / be using the DMM drivers which look for DM800 clones and report the same to your OSD.


If you use all the older images prior to bootloader 70 you will have no issue at all.

[wombat]

as it says, if your firmware uses bootloader 70 and above (as all the new images do above in 2009) which you will see in their release note, you will be subject to / be using the DMM drivers which look for DM800 clones and report the same to your OSD.


If you use all the older images prior to bootloader 70 you will have no issue at all.

Greatly appreciated jonc, cheers

[tmsani]

Who sells Dm800 clone in oz?

[jonc]

everyone it seems