1: use a standard network cable
2: plug it into dream and modem/router/switch
3: make sure network has dhcp enabled in the dream
4: reboot dream
5: should have been given an ip via router/modem etc
Hope someone can help me here
I have DM500 and when I go to expert setup for my IP address it says 10.0.0.70 ; which I think is not the right IP
however, the ntgrb (something similar) IP is 192.168.0.70
is this my IP; if so, I couldnt connect through an ethernet cable. is that a problem cuz most forums say crossover cable. Can someone elaborate on this.
is it also possible to test and see if my IP address is right from DM box.
Thank you
Look Here -> |
1: use a standard network cable
2: plug it into dream and modem/router/switch
3: make sure network has dhcp enabled in the dream
4: reboot dream
5: should have been given an ip via router/modem etc
Thanks Diavalo
I went to my TCP conf and I entered IP on my PC to match the one from DM box, still no sucess
is IP address has to be 192.168.XXX.XXX
is it the one in netgrb setting or the top one when you go to Expert setup.
I appreciate the quick support
IS it new or 2nd hand by some chance..(previous setup for testing)
How are you running the dream ??
via a router/switch etc ?? if so as pointed out, go to setup menu, check for DHCP reboot & will assign IP addy (with standard cat5 cable)
after reboot go to menu again & it will tell you IP addy, then connect via FTP or whatever..
DM500s & Relook 400S Owner.. was now =
copy of ATV Flash for ATV Gen1
WTD : Sniper Elite for Wii - with Rifle if possible
RIP gw1, "LIFE MEMBER" u will be sadly missed
Thanks I will try that.
New off EBay but my friend by mistake went and reset the box to factory and everything is lost now
My Sat Transponder disappeared and all I see now is no setallites but when I do Auto scan it shows me two SRs
6900 and 67xx
funny huh, I erased and flased many images later on but still this one is still appearing.
I got the last image from Pli-jade (yellow backgroud)
Well i seriously suggest you go to the pli wiki website and start reading because with what you have just said tells me you will be asking a million questions that are clearly detailed on their site and if you ask those questions here you will be continually pointed to their site
Thanks Man
I appreciate it
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
Yeah I use to have the green one but someone suggested the latest Pli image from the Pli website
it is funny that they dont have listing for 500C, and i downloaded the one for 500 at the top of the site
is that correct?
DM500s & Relook 400S Owner.. was now =
copy of ATV Flash for ATV Gen1
WTD : Sniper Elite for Wii - with Rifle if possible
RIP gw1, "LIFE MEMBER" u will be sadly missed
If you look at the "info" page in your PLi image you will find four (maybe five now) of us who use Austech also listed in there as well.
I am the writer of the Pli Wiki for my sins and a tester, so when I say the latest software for your 500, as of writing this message here, is PLi Jade, it is really PLi Jade but a new release will be along shortly for the E1 boxes.
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
Reality is an invention of my imagination.
ಠ_ಠ
Bookmarks