just give up and save my eyes reading the same thread 100 times
Before I give up ( for a short period of time ) there are many users here that can get a sky card to work in a DM box so my questions are
What softcam /What version ?
What card ver 17 / 45
any additions to the cam config file ?
External ( jaycar etc ) or internal
Boxkey required ?
With regard to boxkey a member did give me some help and that it can be found in your skybox menu but the only useful number I got was the actual STB serial number ( last 9 digits but the last digit on label was A last digit in info on STB was 4 ) converted to hex still no joy CCcam
I am sure there are some here with both cards 17 / 45 working
Look Here -> |
just give up and save my eyes reading the same thread 100 times
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
And the beat goes on!
hey, just wondering if anyone had there card stop on the 10th of may, 2011?
Yes... Most shares have now gone down... we are all trying to workaround at the moment.
upgrading to Premium soon LOL
I bet you're using CCcam. I hear Oscam and a funny number under your receiver is your solution
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
best4less (11-05-11)
process for NDS boxkey conversion.. this is a theoretical stb number for demonstrating the process only... Your stb will have its own unique number tied into your card.
take the last 10 digits of the sky STB ID number on the sticker on the rear or underneath... example ID NO. 80965423152671A = 423152671A
then....
take the first 9 digits... example 423152671A= 423152671....
goto start/programs/accessories/calculator... view... scientific mode.
type in the number above then click on the HEX radio button.. it will return the hex value... 1938CC1F
this is the BOXKEY for the stb number above...
if there are zero's at the start of the final number you need to put into the calculator then forget them and add what numbers you can... THEN ADD a zero (OR two, if there were two) to the start of the hex value.
ie.. 35212012345678A = 012345678 = BC 61 4E PLUS THE ZERO('s) YOU COULDNT PUT INTO THE CALCULATOR = 00 BC 61 4E
IT HAS TO HAVE 8 FIGURES IN THE RETURNED KEY.. IF NOT ADD THE ZERO'S AT THE START.
Hope this helps get people back online.. keep this post updated please
Ady_m
Sorry for the double post but quite a few members are reading about this problem over here.
Last edited by Ady_m; 11-05-11 at 10:19 PM. Reason: CORRECTION
upgrading to Premium soon LOL
no problems here, always used oscam, still going without problems. emm updates and ppv purchases on skywebsite all working.
to be more exact im using oscam build #4158 and cccam 2.1.4 as client with emm-g blocked.
oscam.conf
oscam.serverCode:[global] logfile = /dev/null disablelog = 1 disableuserfile = 1 fallbacktimeout = 1500 bindwait = 30 nice = 0 preferlocalcards = 1 saveinithistory = 1 readerrestartseconds = 30 lb_mode = 3 lb_save = 300 [newcamd] port = 15000@096A:000000 key = 0102030405060708091011121314 allowed = keepalive = 1 mgclient = 0
oscam.userCode:[reader] label = sky enable = 1 protocol = internal device = /dev/sci0 services = caid = 096A detect = cd mhz = 368 cardmhz = 368 ident = 096A:000000 group = 1 emmcache = 1,1,2 blockemm-g = 1 lb_weight = 100
theres no need to insert boxkey, oscam gets this automatically from card.Code:[account] user = dummy pwd = dummy group = 1 monlevel = 4 au = 1
needless to say cccam also needs n line to oscam
working on vu+duo.
Last edited by gareth41; 11-05-11 at 11:10 PM.
digitaldvd (12-05-11)
I'm using DM500S, Enigma, CCcam 2.0.10.
I tried a different image PliJade, CCcam 2.2.1 and also entered the boxkey as suggested by others, but still did not work. Although I'm not 100% sure with the STB serial number because mine has 7 Alpha + 9 numeric digits only, unlike others who said they have 10 or 11 digits.
Perhaps someone in this forum can confirm if entering the boxkey really works. I haven't tried gareth41's suggestion of using OSCAM yet because I noticed his setup if vu+duo and not Dreambox. I know for sure the card still works with other boxes as I've tried it with Openbox, but somehow it seems like it only stopped working for Dreamboxes.
soft (21-05-11)
It's not the image it's the emu. Also DM's and Vu"s run a similar platform and use the same emu's.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
thanks leroy. information noted. in that case, if no one can confirm that the boxkey method will work, i'll try OSCAM instead when i get home. i'll post my results later if it works.
The Boxkey method did not work, so I installed Oscam and updated the config files as suggested by gareth, but still no joy. The config files I updated are oscam.conf, oscam.server, oscam_user and were saved in /var/tuxbox/config.
One thing I noticed, however when I installed CCcam_2.2.1/OSCam 1.0 using (e1-cccam_2.2.1_101122.tar.gz) it did not create an OSCAM executable file in /var/bin. Where did it put the OSCAM executable??? Because I can't find the oscam exe I did a search for an OSCAM.EXE and downloaded one from the net. FTP the file to /var/bin and then renamed it to "oscam_1.00" then chmod 755. I used "oscam_1.00" because it is the name of the exe in the script file CCcam_2.2.1_oscam_1.00_cam.sh in /var/scripts. To be exact, the oscam exe is a .99 version and not 1.00. Not sure if that makes a difference.
I'm using DM500S, Gemini 4.2. Is there anything I missed?
Is there anyone whose card stopped working last 10 May able to make the card work again? Will appreciate if you could share what steps you did.
Last edited by mjordan; 12-05-11 at 06:21 PM.
set for 10750 lnb with tone off.
oscam web interface is on port 8000 user/pass admin/admin
just shove card in slot and your in business, tested on mine and working.
Emm also working, I ordered box office movie from website and it came on stright away.
edit: will do one for vu+duo when I have some more time.
Last edited by gareth41; 12-05-11 at 08:56 PM.
use the latest stable pli image. download and install oscam from the plugins menu aswell as CCcam. download my config files from below and copy them to /var/tuxbox/config on your DM800. You will also need to configure an N line in CCcam.cfg to the obvious.
Go into the webinterface on port 8000 admin/admin and see if it recognises the card in log. If you have problems with the oscam binary downloaded from pli plugins menu, then try overwriting it in /usr/bin with my oscam version, also included with the download below.
Last edited by gareth41; 12-05-11 at 09:30 PM.
Thanks very much, I'll give that a try now.
*EDIT I've edited the N lines and CCcam is connecting to Oscam the log shows but still no picture, CCcams log is showing pid unknow for all channels
2011/05/12 1320 2C627500 c dummy (096A&000000/03F4/6B:C3B8): found (165 ms) by nz (of 1 avail 1)
2011/05/12 1330 2C627500 c dummy (096A&000000/03F4/6B:302E): found (170 ms) by nz (of 1 avail 1)
2011/05/12 1340 2C627500 c dummy (096A&000000/03F4/6B:E69E): found (171 ms) by nz (of 1 avail 1)
2011/05/12 1350 2C627500 c dummy (096A&000000/03F4/6B:ECF4): found (171 ms) by nz (of 1 avail 1)
2011/05/12 1300 2C627500 c dummy (096A&000000/03F4/6B:26D5): found (170 ms) by nz (of 1 avail 1)
2011/05/12 1310 2C627500 c dummy (096A&000000/03F4/6B:0745): found (166 ms) by nz (of 1 avail 1)
2011/05/12 1320 2C627500 c dummy (096A&000000/03F4/6B:863E): found (169 ms) by nz (of 1 avail 1)
Last edited by WoundedGuineaPig; 12-05-11 at 10:36 PM.
I installed Oscam onto DM500S. Here's the log when I run OSCAM using telnet. (Serial and Box ID replaced with XXXXX). It looks like the card is being read correctly, but why still no picture onscreen?
Will try Gareth's image next. Hope that one works.
Code:2011/05/13 16:35:24 30016290 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5224 (powerpc-tuxbox-linux) 2011/05/13 16:35:24 30016290 s version=1.00-unstable_svn, build #5224, system=powerpc-tuxbox-linux, nice=-1 2011/05/13 16:35:24 30016290 s client max. idle=120 sec, debug level=0 2011/05/13 16:35:24 30016290 s max. logsize=10 Kb, loghistorysize=4096 bytes 2011/05/13 16:35:24 30016290 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms 2011/05/13 16:35:24 30016290 s services reloaded: 0 services freed, 3 services loaded 2011/05/13 16:35:24 30016290 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled 2011/05/13 16:35:24 30016290 s signal handling initialized (type=sysv) 2011/05/13 16:35:24 30016290 s 775 service-id's loaded in 27ms 2011/05/13 16:35:24 30016290 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded 2011/05/13 16:35:24 30016290 s 5 provid's loaded 2011/05/13 16:35:24 30016290 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded 2011/05/13 16:35:24 30016290 s monitor: disabled 2011/05/13 16:35:24 30016290 s camd33: disabled 2011/05/13 16:35:24 30016290 s camd35: disabled 2011/05/13 16:35:24 30016290 s cs378x: disabled 2011/05/13 16:35:24 30016290 s newcamd: initialized (fd=6, port=10000, crypted) 2011/05/13 16:35:24 30016290 s CAID: 096A 2011/05/13 16:35:24 30016290 s provid #0: 000000 2011/05/13 16:35:24 30016290 s radegast: disabled 2011/05/13 16:35:24 30016290 s http thread started 2011/05/13 16:35:24 30016290 s creating thread for device /dev/sci0 2011/05/13 16:35:24 30016290 s loadbalancer: can't read from file /tmp/.oscam/stat 2011/05/13 16:35:24 30016290 s waiting for local card init 2011/05/13 16:35:24 31825B50 h HTTP Server listening on port 8000 2011/05/13 16:35:24 32025B50 r reader thread started (thread=32025B50, label=sky, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357) 2011/05/13 16:35:25 32025B50 r sky card detected 2011/05/13 16:35:25 32025B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR 2011/05/13 16:35:26 32025B50 r ATR: 3F FF 13 25 03 10 80 33 B0 10 69 FF 4A 50 70 00 00 4E 5A 01 00 00 2011/05/13 16:35:27 32025B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz 2011/05/13 16:35:28 32025B50 r [videoguard2-reader] parental lock setting: FF 7F 00 00 2011/05/13 16:35:28 32025B50 r [videoguard2-reader] type: VideoGuard Sky New Zealand (096A), caid: 096A 2011/05/13 16:35:28 32025B50 r [videoguard2-reader] serial: XXXXXXXX, BoxID: XXXXXX, baseyear: 1992 2011/05/13 16:35:28 32025B50 r [videoguard2-reader] ready for requests 2011/05/13 16:35:28 32025B50 r found cardsystem videoguard2 2011/05/13 16:35:28 32025B50 r [videoguard2-reader] sky card detected 2011/05/13 16:35:28 32025B50 r [videoguard2-reader] type: VideoGuard Sky New Zealand (096A) 2011/05/13 16:35:29 32025B50 r [videoguard2-reader] tier: 00fe, expiry date: 2011/06/22-00:00:00 2011/05/13 16:35:29 32025B50 r [videoguard2-reader] tier: 0fa0, expiry date: 2011/06/22-00:00:00 2011/05/13 16:35:29 32025B50 r [videoguard2-reader] tier: 0faa, expiry date: 2011/06/22-00:00:00 2011/05/13 16:35:29 32025B50 r [videoguard2-reader] tier: 0fb4, expiry date: 2011/06/22-00:00:00 2011/05/13 16:35:30 30016290 s init for all local cards done
Last edited by mjordan; 13-05-11 at 03:52 PM.
DM500S, Gemini 4.2, OpenBoxS9
Bookmarks