Is the satellite you are trying to blind scan in your satellite.xml file.
Can you select the satellite you want to blind scan from the confiure satellite menu.
If you can see it there can you get a lock on the signal
i have been scratching my head over this for a while....
can someone once and for all definitively explain exactly how to get this working in a DM600s running PLi Jade?
all my googling has helped me do nothing other than destroy my satellites.xml file.
Look Here -> |
Is the satellite you are trying to blind scan in your satellite.xml file.
Can you select the satellite you want to blind scan from the confiure satellite menu.
If you can see it there can you get a lock on the signal
the satellites i want are in my satellites.xml file i can do a multisat/auto transponder scan fine.
i can select the satellite in the blindscan plugin... however when i go to start scan i get:
i am aware that the plugin is poorly written however i thought it would at least give some results... not some crappy vague error message
i have only success in scanning c band , no luck with ku band
so no ku blindscan?
what a f*** useless feature!!!!
similar to tits on a boar pig
Last edited by kcsoft; 02-11-09 at 07:50 PM.
Yes,
I get the same error with PLI and DM600.
bloggs
so no go?
pli forums are really unhelpful....
this blindscan thing is starting to piss me off why put it in the dm600 image if the fkin thing doesnt work??!!
hey casey - ease up mate
pli forum and austech forum are very helpful
- but first you have to help yourself by searching
- just because you cant crack it - dont mean it dont work
patience, perserverence and might I say manners go along way in here
blindscan does work on my dm600 with these settings
Note : I have a 10700 lnb
1. Lof/L 10000
2. Lof/H 10700
3. Threshold 11800
the error you got is in fact exactly right - you have no transponder in your sat file on the lof/h setting so ..
Then in my satellites.xml against the sat I am scanning I added entries to put transponders like this
<transponder frequency="10000000" symbol_rate="27800000" polarization="1" fec_inner="0" system="0" modulation="1"/>
<transponder frequency="10000000" symbol_rate="27800000" polarization="0" fec_inner="0" system="0" modulation="1"/>
or try 10600000 instead of the 10000000
if it still dont work - there are some tuners that support the code and others that dont - you might have one of the "don'ts"
Last edited by nfnovice; 03-11-09 at 09:16 AM.
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
Yep,
That did it nfnovice. Thanks - you are a legend!
bloggs
nfnovice, sorry for my rudeness earlier.
is it okay to edit my satellites.xml by hand?
last time i tried i screwed it up royally.
also if i do edit it by hand which proggie to use?
managed to edit the file without screwing it up but still no luck. guess my clone doesn't have an alps tuner in it.
does anyone know how to identify the tuner without lifting the cover?
i tried a few linux commands but i can't find anything
I use notepad++ to edit any file from dreambox
it retains unix format for those that need it
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
kcsoft (04-11-09)
type in this code at telnet will give you a tuner type
mine respondsgrep nim /proc/bus/dreambox
nim=Alps -S(STV0288)
nimtype=DVB-S
did you make the lnb setting changes in satellite setup as well as changinng satellites.xml ??
Last edited by nfnovice; 04-11-09 at 01:19 PM.
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
kcsoft (04-11-09)
Bookmarks