Change the LNB 10.7
Hi
I have an interesting problem on an old dish that belongs to my parents. I sometimes visit and take my A*star flinders box with me. On a recent visit I noticed that some channels received an e37 message stating they were unavailable. Their dish has an 11300 LNB. Having read some forums on austech i decided to buy myself a 10700 LNB and change it. Once I changed the LNB and made the necessary change on the decoder I found that the opposite channels became unavailable but came up with an e 52 error while the channels that had not worked with 11300 LNB were working.
Does anybody know why this might be? It seems that channels with a frequency of 12300 mhz and above don't work with 10700 LNB while channels below this won't work with 11300 LNB. Is this the caused by the changeover to the new satellite? What can I do?
Look Here -> |
Change the LNB 10.7
Reboot/rescan the receiver. LNB skew maybe ?
OSIRUS (05-11-09)
I changed decoder to 10.7 and did a rescan and reboot. I will try to fiddle around with LNB skew and see what happens.
It is all ok now. I fiddled with LNB skew after looking on another dish. I have all channels back now. Thank you all for your help
Bookmarks