which image are you using
(the 600)
also dont the 600's have problems with the serial port?? (aka dreamup)
Hi
I have got a new DM600 with a sattelite reciever and i have got a Cable tuner for it.
shoud the cable tuner work directly in the DM600 or will i need to flash the box. if so where do i find the optus PLI image for it. i have tried using dreamup and flash wizard with the image you get directly from pli. the PLI JADE 2 with ENigma 1. the flashwizard pro says file not (yet) supported for DM7020 when i load the nfi file and the dreamup wont even look at the box over the network. i got what jaycar prommesed me was a null modem cable but when i connect to the computer with it nothing happens. it is wired up like a strate through serial tho. what do i do from here?
Look Here -> |
which image are you using
(the 600)
also dont the 600's have problems with the serial port?? (aka dreamup)
Last edited by z1gg33; 14-11-09 at 07:02 PM.
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
actually i have now uploaded that image and now i have no channels and when i do a transponder scan it comes up with nothing
yep thats the current 600 image.
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
what is under blue button then 2
for dvb-s it is satellite and transponders
for dvb-c it might have cable and transponders ?
have you changed settings/anything in there ?
the foxtel channels you had were prolly from dvb-s - they will definitely be different under DVB-C
Last edited by nfnovice; 14-11-09 at 08:10 PM.
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
z1gg33 (14-11-09)
z1gg33 (15-11-09)
agreed LP - serial ok for dreamup - no good for phoenix
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
Bookmarks