tomtom speedcam not working

**puca** · 13-01-10, 07:59 PM

hi guys just noticed in the tomtom issued speedcam the point to point speedcam are not working on my unit i went through quite a few of them over the Chrissy period and now waring also ungated rail crossing used to work a few years ago but also noticed they are not working yes have loaded the latest cams from ipmart and used the keygen to create the dct file any ideas what could be the problem
map is 840.2562 navcore 9.004
all warnings have been set it appears that non of the genuine tomtom cams are working
cheers puca

**Downunder35m** · 13-01-10, 08:12 PM

are the latest as far as I know.
If you get no warning at all please check :
1. that you still have a .DCT file for the cams in the map folder - try to make a new one with Keygen4.1 anyway.
2. can you select the safety cams in Tomtom services and if so ,can you select an test different warning sounds?

If you have a working back ,put it on your device (after making a backup of the current setup) and check the cams , if working copy the new cam files on there and check again.
The cams are working fine on my device ,so I assume there must be some file corrupt or deleted on your device.

**hollowman** · 14-01-10, 12:33 AM

when you say "not working" do you mean no warning sound / no icon or both ?

**Downunder35m** · 14-01-10, 01:41 AM

Have you checked the settings in another emulation?
I have full options for the speed cams in X40 emu.

**puca** · 14-01-10, 04:32 AM

hi guys thanks for your replies ok reloaded backups from past i have to go back to early nav 7 before i get the cams working after 7.4 they don't seem to work
yes hollowman no icons or sound warning its as if not installed i know they are there have i can access them through the menu but they don't show even when doing a demo run all other speedcams are working

**Downunder35m** · 14-01-10, 11:40 AM

Have you checked the sounds folder for the missing files?
Have you tried to activate them again - what keygen ?
I can upload the sounds if you need them.

**hollowman** · 14-01-10, 12:03 PM

im no tt expert, but ill take a stab in the dark..

i think a file is corrupted somewhere.... will it take to long to reinstall everything ?
navcore/app/map/cams etc ??