if what im asking for is not possible then I will be happy for:
DM 800 reading the gamma no need to share it to others
DM 500 NDS server
DM 500 NDS client
any susgtions please?
thanks allot
Hi guys,,
I did allot reading the past two days, but I couldn't find anything on how to get the orginal gamma 1.4 to work in internal slot of DM 800 using it to get MCSA , the card works fine in any strong box,
the dm is reading the card as irdeto 2 but no picture displayed, all the info I found was related to use via phonex programer, and the config I found here and there are:
<device>
<name>Pheonix Nova gamma</name>
<type>phoenix</type>
<mhz>368</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdeto-camkey>0000000000000000</irdeto-camkey>
−
<irdeto-camkey-data>
000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000
</irdeto-camkey-data>
<crypto-special>No</crypto-special>
−
<ipk>
0000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000
</ipk>
−
<ucpk>
000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000
</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34010</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
-------------------
and
B: /dev/tts/0 04
B: /dev/tts/0 06
SERIAL READER : /dev/tts/0 phoenix
PHOENIX READER PATH : /dev/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/tts0 6000000
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
---------
now my project is the following:
I need 3 dreamboxes but I got 2 for now.. I have DM500 and DM800,
the project involves getting 3 DMs in the house
DM500 will be NDS server using newcs and mgcamed (and at the same time client for DM800)
the DM800 will be server for the gamma card once i get itt working, but not sure what emu to use here, and client at the same time for the NDS
the last DM will just be client of both...
so can you please point me to the right direction on how to get my dm800 to work with gamma with out using the phonex reader since the dm already reads the card?
thanks allot for the help
Look Here -> |
if what im asking for is not possible then I will be happy for:
DM 800 reading the gamma no need to share it to others
DM 500 NDS server
DM 500 NDS client
any susgtions please?
thanks allot
why not just share the 2 cards off one box, gamma from comport & nds in slot. sharing back to 3 boxes would be fine, the dm800 will share the MCSA card from anywhere it doesn't have to be on the dm800, or even try serving both from the dm800.
with oscam & I believe cccam 2.13 both can read the gamma in the slot on a dm800.
theres no real need to have each box serving.
ditto what he said....
HAHA it posted twice
ok guys im still having no luck
im using newcs to read the card (which is readble)
and i tried two emu's mgcamed and cccam here is the config
Code:This is newcs config <newCSconfig> - <readers name="Dreambox SCI"> <globals> <listening-ip>127.0.0.1</listening-ip> </globals> <device> <name>SCI Lower Slot</name> <type>sci</type> <mhz>358</mhz> <node>/dev/sci0</node> <parity>none</parity> <reset>normal</reset> <export>yes</export> <enabled>yes</enabled> <blocksa>no</blocksa> <blockua>no</blockua> <blockga>yes</blockga> <blockC0>yes</blockC0> <carddetect>yes</carddetect> <newcamd_port>15000</newcamd_port> <autosid>yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> </device> This is mgcamd config CWS = 127.0.0.1 15000 user local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs this is CCcam config N: 127.0.0.1 15000 user local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs 0604 358 3 0 /dev/sci0 0 (SCI Lower Slot)
any reason why you have these blocked ?
<blockga>yes</blockga>
<blockC0>yes</blockC0>
i dono, i will try unblocking, anything else?
OR<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>none</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdetomode>0</irdetomode>
<blockc0>No</blockc0>
<crypto-special>Yes</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>No</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<priority>round</priority>
Try any of them<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>none</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdetomode>0</irdetomode>
<blockc0>No</blockc0>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<priority>round</priority>
dm800 front slot filled with white , scam downloaded via dm800 , once installed instant pics
Bookmarks