have a look in the newcamd.list file in the /var/keys after you have loaded the cam and the config via your dreamboxes blue panel.
Leroy
hello I want to know if i can connect to a newcamd server using mgcamd. Currently I use CCcam to connect to it using an N: line.
I have searched around but can not find alot if info on mgcamd.
here is an example of my CCcam config
N: 66.249.89.104 1001 potatoe chips 01 02 03 04 05 06 07 08 09 10 11 12 13 14
could some one please help me out and let me know is this posible and give an example of what the Mgcamd config should look like.
I want to try and veiw the winter olympic channels.
Thanks in advance
Look Here -> |
have a look in the newcamd.list file in the /var/keys after you have loaded the cam and the config via your dreamboxes blue panel.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
ggg123 (18-02-10)
ok thanks I will try that now
I didn't know that was for mgcamd, thanks for not flaming me.
I have a file in there called newcamd.list.example
I just rename the file and take the .example off the end ?
yep
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
your newcamd.list in \var\keys should look like this:
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 66.249.89.104 1001 potatoe chips 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan newcs
Also, your mg_cfg in \var\keys should look like this if you want to be able to receive messages from your server, and send emm updates if a channel cannt be decoded.
M: { 00 }
C: { 00 }
A: { 02 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 04 } 5 5
K: { 05 }
Q: { 600 }
P: { 02 }
O: { 02 } root dreambox
S: { 02 } 80
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 02 }
Dont forget to change root and dreambox to you dm password.
Datalane -
ggg123 (18-02-10)
with cccam you use port 16001, what port does mgcamd use?
woteva
gavogr (04-09-13)
hey folks, hope that its okey im hijacking the thread.
i have a mgcamd/newcs question/problem that i hope someone can help me with.
i have a newcs server with a Via card and a user created.
on the client a dm 800hd gemini 5.1 running mgcamd+newcs.
i have added the cws to the newcamd.list, but my problems is that the client all the time reconnects and GUI reboots (in the box).. what can it be?
On the topic of linking to newcamd;
I have a setup where CCcam client boxes in the house connect to CCcam server using purple. All works fine. Now I want to connect CCcam server to newcamd for ppua instead of purple, so existing clients can continue to use CCcam for connection. I'm having trouble running newcamd and CCcam on the server at the same time. Is it possible? The connection between both cams is there, just newcamd shows an error saying it can't read the data thats being sent by CCcam. Newcamd on its own works perfectly.
CCcam.cfg
newcamd.confF: xxx xxx
F: xxx xxx
F: xxx xxx
F: xxx xxx
N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#NEWCAMD CONF : yes
SERVER LISTEN PORT : xxxxx
# BOXKEY: /dev/sci0 xx xx xx xx
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0
SMARTCARD WRITE DELAY: /dev/sci0 100
SMARTCARD CLOCK FREQUENCY : /dev/sci0 7800000
EMU = yes
PREFER_EMU = yes
AU = yes
OSD_TIMEOUT = 3
OSD_WEB_LOGIN = root:dreambox
SHOW_ALL_CA_SYSTEMS = no
DEBUG_ECM = yes
DEBUG_EMM = no
DEBUG_CWS = yes
DEBUG_CAM = yes
SHOW_PAT = no
SHOW_PMT = no
SHOW_ECM = no
SHOW_CAT = no
SHOW_EMM = no
SHOW_CWS_ECM = no
SHOW_CWS_EMM = no
EMM_REPORT_WRONG_SIG = no
DEFAULT_CW_DELAY = 0
RELOAD_CONFIG_ON_ZAP = yes
RELOAD_KEYLIST_ON_ZAP = no
CA_INFO_FILE = /tmp/cainfo.txt
CWS = 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 10000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = no
ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Last edited by Smacca; 11-03-11 at 06:50 PM.
try oscam you might have better working server!!! take the # out b4 the newcamd config in cccam config i thing that might make a difference!!!
GREETINGS.
Hi,
Would be most grateful if you would indicate a guide on How to incert my C lime Mgcamd/Newcamd.list --on TS PANEL 6.9
Have been struggling since end of February.
ECM is not visible ( which usually shows the server info also).
Thanks for studying the possibility of providing your help to get the c-line working smoothly.
Thanks again.
Best Wishes,
Bookmarks