Page 1 of 2 12 LastLast
Results 1 to 20 of 37

Thread: Service Manual for Electrolux Front Loader Washing Machine

  1. #1
    Member
    Join Date
    Jan 2008
    Posts
    195
    Thanks
    73
    Thanked 22 Times in 14 Posts
    Rep Power
    11

    Default Service Manual for Electrolux Front Loader Washing Machine



    I've got a small problem with a EWF1080 Front loader Washing machine,it times out on the first fill of water,gives a E10 code,and reqires a reset button operation to get it to continue filling water and then its alright. I've checked water pressure and had a general look under the bonnet,its either a board fault that has changed a timing thing or a level sensor problem,either way its still works ok after the reset. A service manual would be a real help here to identify things>



  2. #2
    Senior Member omega99's Avatar
    Join Date
    Feb 2008
    Posts
    601
    Thanks
    53
    Thanked 51 Times in 37 Posts
    Rep Power
    21

    Default

    hope this helps
    woteva

  3. The Following 3 Users Say Thank You to omega99 For This Useful Post:

    efab (17-07-10),humax300 (05-05-10),Romulus (08-08-10)

  4. #3
    Member
    Join Date
    Jan 2008
    Posts
    195
    Thanks
    73
    Thanked 22 Times in 14 Posts
    Rep Power
    11

    Default

    Thanks Omega99,I think this has convinced me to part with a bit of cash,the amount of free information that I've got from this site starting from my sat days to now deserves my input.

  5. #4
    Member
    Join Date
    Jan 2008
    Posts
    195
    Thanks
    73
    Thanked 22 Times in 14 Posts
    Rep Power
    11

    Default

    Quote Originally Posted by omega99 View Post
    hope this helps
    Forgot to tell you what the problem was so here it is/was,the water inlet valve was only turning on partially so it wasnt passing enough water,the replacement valve was only $59 so it was a good fix,thanks again.

  6. #5
    Senior Member omega99's Avatar
    Join Date
    Feb 2008
    Posts
    601
    Thanks
    53
    Thanked 51 Times in 37 Posts
    Rep Power
    21

    Default

    no worries hope the manual was of help
    woteva

  7. #6
    Member
    Join Date
    Jan 2008
    Posts
    195
    Thanks
    73
    Thanked 22 Times in 14 Posts
    Rep Power
    11

    Smile

    Yep,the manual guided me through the tests,without it i would have been lost.

  8. #7
    Junior Member
    Join Date
    May 2008
    Posts
    13
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default

    Hi Guys,
    I have an EWF1090. I'm guessing the manual applies to it as well??

  9. #8
    Senior Member omega99's Avatar
    Join Date
    Feb 2008
    Posts
    601
    Thanks
    53
    Thanked 51 Times in 37 Posts
    Rep Power
    21

    Default

    if not try this one
    woteva

  10. The Following User Says Thank You to omega99 For This Useful Post:

    treebeard (12-07-10)

  11. #9
    Junior Member
    Join Date
    Jul 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Ewf1455

    Would it be there any chance for EWF1455 as well, please?

  12. #10
    Senior Member
    Join Date
    Jan 2008
    Posts
    723
    Thanks
    468
    Thanked 167 Times in 113 Posts
    Rep Power
    31

    Default

    Quote Originally Posted by omega99 View Post
    hope this helps
    thanks omega99 I got one of these as well so may come in handy

    cheers

  13. #11
    Senior Member omega99's Avatar
    Join Date
    Feb 2008
    Posts
    601
    Thanks
    53
    Thanked 51 Times in 37 Posts
    Rep Power
    21

    Default

    Quote Originally Posted by piotrlech View Post
    Would it be there any chance for EWF1455 as well, please?
    sorry can't help with that one
    woteva

  14. #12
    Junior Member
    Join Date
    Jan 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Efw1090

    this is probably a pretty lame request, but i need to know how to get into this machine to replace the belt, it snapped. i am guessing it cannot be too hard but i do not want to rip apart everything. is there a manual for this machine? thank you in advance Brang

  15. #13
    Senior Member
    Join Date
    Jan 2008
    Posts
    570
    Thanks
    464
    Thanked 77 Times in 53 Posts
    Rep Power
    22

    Default

    Efw1090
    this is probably a pretty lame request, but i need to know how to get into this machine to replace the belt, it snapped. i am guessing it cannot be too hard but i do not want to rip apart everything. is there a manual for this machine? thank you in advance Brang
    cant help sorry, my samsung threw the belt an i had to cut a hole in the back, stop the wheel wobbling with a new washer and put belt on

  16. #14
    Junior Member
    Join Date
    Apr 2011
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default exf 1090 service manual

    where do i find the manual?

  17. #15
    Junior Member
    Join Date
    Apr 2011
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default

    Quote Originally Posted by omega99 View Post
    hope this helps
    thanx

  18. #16
    Junior Member
    Join Date
    May 2011
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Manual for EWF 1090

    Hi,
    I'd like to see the EWF 1090 manual also. Where can I find it?

  19. #17
    Junior Member
    Join Date
    May 2011
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default

    Found it - thanks for posting this online.

  20. #18
    Junior Member
    Join Date
    Jun 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default ewf 1090 electrolux front loader E20 fault error code

    IF ANYONE OUT THERE IS SUFFERING THE PAIN OF HAVING THEIR WASHING MACHINE PLAYING UP DUE TO THE E20 CODE ERROR.. I HAVE A SOLUTION FOR YOU YAY!!!!!!!!

    WE JUST FIXED OURS YESTERDAY $AVING HUNDREDS OF DOLLARS IN CALL OUT AND REPAIR FEES. ( SMART HUBBY OF MINE) XX

    All you have to do is disconnect the power.. lift onto 2 saw horses. Remove the rubber sealed plate at the base( the odd shaped one) and unscrew the drain hose where it meets the front of the washer. the coins will drop out (50c yes) we had four in there .... Reattach the hose.. Replace bottom panel.. then put back on floor.. switch on and presto FIXED 2 people to lift! Hope this helps some people out there!

  21. #19
    Junior Member
    Join Date
    Jun 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Electrolux EWF1090 door seal

    Hello
    Our washing machine has a small tear in the door seal and water simply pours out. Is there any way I could repair the tear (it's on the outer edge... perhaps glue???) or do I need to replace it? Does anyone have any instructions on how to fit a new seal or would I have to pay a repair man? Finally, if it can be saved, does anyone know how to clean up the mould-like build up on parts of the seal (not near the tear)? Cheers...

  22. #20
    Junior Member
    Join Date
    Dec 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default noisy Electrolux EWF1090

    [QUOTE=treebeard;315131]Hi Guys,
    I have an EWF1090. I'm trying to locate the knocking when the washing machine is on the spin cycle, I would like an expolded view of the machine and possible solution to the noise.

    thanke for reading
    stafford
    Last edited by fly2743; 26-12-11 at 07:48 PM.

Members who have read this thread: 23

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •