ms_biju73: the closest match for your device would be
I tired of searching for rom & opened up dead pna.I found the model number as YG-912M-ABFSJ-IM-AS-6LS-V2.2....Please tell me any way I which I can bring it alive
This has all happened due to flashing with wrong firmware...Anybody please help me
ms_biju73: the closest match for your device would be
ms_biju73 (22-01-13)
Thank you brother
I will give a try & come back
Dear Bro ablbd,
I just copied the files to root of micro sd & started,Unfortunately nothing is happening.
My rom v is v. 13 m 000000.100829.128 m.
But after becoming semibrick condition by the use of miopocket,I used rom v 13 m 000000.100828.128 m.
This inturn completely bricked the device.Now only shows battery while charging & only a white screen while switched on.
It is not even communicating with pc . Any thing can be done?
Anyway thank you once again for the share...It will be helpful for someone struggling like me..
Hi Awl, sven the @orrrible here, i'm into Grape and Spillage. and over the years i have fuzzled my marinated grey matter, grey is the right colour i was never that 'bright', anyway to the point.
I have two 5" no name YFs. Had them for a long time with one kept in the draw just in case. Thought i would load Primo Truck onto 'em, The one i regularly use no probs, loaded another sd card with same software and inserted into the sd card slot of the one kept in the draw for safe keeping, it works but 'by jimmininy' it ain't half slow, tooo slow. I can take the sd cards out and swap them between the units, and the regularly used one will work as normal and the draw machine will still be slow. So my think there is an issue with the draw machine and not the software, My question is :- Is there a way of re-installing the OS (win ce 6) or is there another way of solving the 'Go Slow'.
Both machine are exactly the same.
5" No Name YFs
WinCe 6
Rom Version : 82AV6.OBO9M26409A.2.6
Software version V3.6.E018.12.3
OEM: YFAtlas4
Platform ID: 5955414E46454E47
Thanks for any help given, sven
Now for a bit more of the grape with hopefully not to much of the Spillage.
I get Takara GP30 alias Wayteq x620. 3.5inc sirfatlasIV win ce 6.0 based gps pnd. Seems it is also YFPA-01 3502. Can some one share any rom for it? I have flashed it whis bad rom and now it cant get satiletes.
Thx in advance.
Hi
I have bricked china gps wince 6 stacked on a boot logo, it is a handhold refernce board, i found same working device and dumped the firmware with NDUMP6, now i have a .img file about 4gb from the working unit. How to revive the dead unit with this file, can i use the ndump6 file to put in the bricked pna or something else?
Good evening, I need firmware "xiip.nb0" who can help me I appreciate it. Thank you.: Confuso:
how to get in to service mode of dead pna? says it can be done with shorting two pins on board..so that we can communicate with dead pna with pnd flash tool.I could not locate the diagram as i don`t know russian...Any body knows Please share it here...My pna is
firmware
No name PNA
processor MTK ARM1176JZ-S-MT3351 (500MHz)
platform YG-912M-ABFSJ-1M-AS-6LS-V2.2
resolution 800X480,5 inch
flash 128 MB
win ce 5 core build 1400
software 13m. 000000.100829.128 m
Thanks in advance
here is the link for the web page i forgot to add
I came to know that my device bricked due to corrupted bootloader....Please tell me how to fix it?....Is there any sites with active discussion on it...
firmware
No name PNA
processor MTK ARM1176JZ-S-MT3351 (500MHz)
platform YG-912M-ABFSJ-1M-AS-6LS-V2.2
resolution 800X480,5 inch
flash 128 MB
win ce 5 core build 1400
software 13m. 000000.100829.128 m
Please help
I have a generic chinese gps (BK-GPS4004DTB). It is stuck in the boot logo since I have modified HKEY_LOCAL_MACHINE\init key.
Information:
CPU: Mediatek MT3351
Rom version: v.912c.703100.111121
app version v1.3.01.1.0.8.12.01.12
Ram: 64M
Rom: 4g
win ce 5 core build 1400
resolution 480x272
Please if anyone could help me.
Last edited by elfaceitoso; 27-01-13 at 05:24 AM.
Bom dia, eu preciso de firmware "xiip.nb0" que pode me ajudar eu agradeço. Obrigado:
You can use Google Translate, register at this forum and download directly
Tomtom GO730 ,Navcore 9.004 ,Bootloader 5.5256 ,Map :Australia 845.2661ttmaps and Tomplayer on 16GB SDHC class6Password for all my files: downunder
I just receveid my gps deveice from dx.com, it starts just once, now is stucked in splash screen. I've no idea the model of the firmware,
SKU: 125749
Model: XM-02
Color: Black + Red
CPU: YFAtlas IV (768MHz)
Receiver Channel Number: 20
RAM: 128MB DDR2
Memory Type: Built-in Flash
Built-in Flash Memory: 4GB
Expansion Slot: TF
Max External Memory Supported: 16GB
Display Size: 5 Inch
Screen Resolution: 800 x 480
Display Type: TFT LCD
Can someone helpme? Thanks
Bookmarks