Oscam and smargo

[mborkp]

Use the same device address as in oscam.server /dev/ttyUSBx
Cheers

you can try also:

remove smargo and put it back, then in console: sudo dmesg
Smargo address should be listed somewhere at the bottom of the info.

[mborkp]

Excellent! Working. Thanks for your help on this one, mborkp. I would have assumed my reader was already at 1.4, I guess one should never assume...

Great!

Cheers

[Onefella]

Decided to try this today and couldn't figure out why it wouldn't work until I tried the line "Device = Serial:Reader xx" with the caps in place.

device  = serial:reader xx

doesn't work, but

device  =  Serial:Reader xx

works

[mborkp]

Decided to try this today and couldn't figure out why it wouldn't work until I tried the line "Device = Serial:Reader xx" with the caps in place.

device  = serial:reader xx

doesn't work, but

device  =  Serial:Reader xx

works

hehe.. that must be the only case sensitive entry line in oscam config files.
Thanks for sharing, might save someone else a gray hair or two

Cheers

[cro69]

ok guys how about explaining how you do the setup for oscam in a satbox what is the reader file supposed to look like in the oscam.server file???

[Hannible]

ok guys how about explaining how you do the setup for oscam in a satbox what is the reader file supposed to look like in the oscam.server file???

With your REP rating and POST count - by now you should know cro69

[crabber]

This is my config for an NDS UK card in a kathrein (SH4) box:
[reader]
enable=1
label = smargo
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,3,2
detect = CD
group = 1
smargopatch=1
caid = 0963
blockemm-unknown = 1
blockemm-s = 0
blockemm-u = 0
blockemm-g = 0

[tedy58]

Hi m8s, I was out of the forum for a long time, but link to it bring me back again, so on the Q.

I would be glad if sombody send me on private, or put a link to the firm v.1.4 of the samrtreader, because the links in the beginig are forbiden,

I checked all my 6 smartreaders are genuin, t.e. no fake spot inside.

thanks in advace.

[tedy58]

ok guys how about explaining how you do the setup for oscam in a satbox what is the reader file supposed to look like in the oscam.server file???

Well here is my reader config that changes sometimes when I reboot the server in some or other reason

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8077
# Read more:

[reader]
label = |0d03|
protocol = smartreader
device = 001:004
pincode =
smargopatch = 1
cacheex_maxhop = 5
caid = 0D03,0D05
detect = cd
mhz = 961
cardmhz = 357
ident = 0D03:000004;0D03:000000;0D05:000000,000008,000010, 000088
group = 1,2,3,4
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
lb_weight = 200
auprovid = 000D03

and now it gave me with
#lsusb -v | grep Serial
the following

# lsusb -v | grep Serial
Bus 001 Device 019: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
idProduct 0x6001 FT232 USB-Serial (UART) IC
iSerial 3 A900emo5
Bus 001 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
idProduct 0x6001 FT232 USB-Serial (UART) IC
iSerial 0
iSerial 0
Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
idProduct 0x6001 FT232 USB-Serial (UART) IC
iSerial 0
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
idProduct 0x6001 FT232 USB-Serial (UART) IC
iSerial 0
iSerial 0
iSerial 1 0000:00:14.2
The first one is phoenix, and others are smartreader+
the same is result and output from webif of oscam for USB smartreaders