-
Junior Member
- Rep Power
- 196
- Reputation
- 15
New Dm500s Won't Lock to C1
Purchased new DM500s flashed ready to go on C1 but i have spent all day trying to work out why it won't lock on to C1 using the legit sub card in it and i've had only limited help from seller and because i have'nt been able to get anything out of the box i don't even know if the unit works or not or maybe the tuner is deaf in it, i have tried aligning the disc but was peaked where it always has been and any movement only made it worse.
The F****L Pace unit has always worked perfectly with near full signal and does'nt even pixel up in heavy rain, but on the DM500s i can only manage to get 72 to 74% SNR and around 85% AGC from the Dm500s and the Lock and Sync indicators stay grey what ever i try.
I have also tried every LNB configeration, frequency and polarization found on this forum as well as on the drop down menu on the unit.
The LNB is a Acer AF2-A and never had a issue with it on the Pace unit or the UEC's before that.
I was tossing up between this and another more expensive model that was recommended to me and i'm now starting to with i had taken that advice.
Can anyone can shed some light as to what i'm doing wrong or something else i could try before i put this one onto ebay.
Thanks.
-
Is your Pace box still working? I'm not familiar with the Pace box. Can you get the LNB setting out of it? This is what you need to begin with.
Leroy
You need to select "non standard satellite configuration".
Then in your lnb settings either:
10700
10700
11700
or
11300
11300
11700
or unlikely but possibly
10600
10600
10600
Junior Member
- Rep Power
- 199
- Reputation
- 15
G'Day
It might be your satellites.xml file.
You may need too edit the transponder list to search for a valid transponder.
You could try Foxtels Home transponder
Symbol Rate = 27800
Frequency = 12438
FEC = 3/4
Hope this helps
Zman
Maybe get the specific transponder details off lyngsat and search under manual until you get it ?
Junior Member
- Rep Power
- 196
- Reputation
- 15
Hi,
Thanks everyone - today i did eventually find the LNB freq was incorrect and after continued experimentation and using the advice given above by everyone on the settings with the correct frequencies in my unit it is now working perfectly, also thanks for the PM from Fernbay and his advice as well and the LNB settings.
I just need to know now how and where to get Autoroll keys so i can FTP them into the unit so i can open up the Aur**a channels but i can't do anything until i can connect my DM500s to my computer as i did'nt have the correct cable handy and i'm only in a small country town without any proper computer shops.
Thanks again everyone.
Wayne
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks