oscam help needed

**band59** · 31-05-11, 02:52 PM

I have 3 d/boxes 500s that were sharing off bluey but as of the other day 1 box has stopped working. Seems that files were deleted not sure how.
Flashed box with pli image and loaded cccam config that was working in box before but would not work. Have been reading and searching and trying different things but cannot make it work. I would appreciate any help with this as it is driving me bonkers.
My config files are

Server Box
Oscam conf

#oscam.config generated automatically

[global]
logfile = /dev/null
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 0
bindwait = 120
netprio = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 0

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 0
monlevel = 2
appendchaninfo = 0

[newcamd]
port = 15000@090B:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1

[webif]
httpport = 8080
httpuser = root
httppwd = oscam
httpcss =
httptpl =
httpscript =
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httpdyndns = xxxxxxxx.dyndns.org
httphideidleclients = 1
httpreadonly = 0

[anticasc]
enabled = 0
numusers = 0
sampletime = 2
samples = 10
penalty = 0
aclogfile = ./oscam_ac.log
denysamples = 8
fakedelay = 1000

[reader]
label = card1
protocol = internal
Detect = none
device = /dev/sci0
group = 1
emmcache = 1,1,2
caid = 090B

Oscam Server

[reader]
label = card1
protocol = internal
Detect = none
device = /dev/sci0
group = 1
emmcache = 1,1,2
caid = 090B

Oscam User

#oscam.user generated automatically

[account]
user = dummy
pwd = dummy
disabled = 0
expdate =
group = 1
hostname =
uniq = 1
sleep = 0
monlevel = 1
au = card1
services =
caid = 090b
betatunnel =
ident = 090b:000000
keepalive = 1
numusers = 2
penalty = 0

[account]
user = ben
pwd = ben
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = card1
services =
caid = 090b
betatunnel =
ident = 090b:000000
keepalive = 1
numusers = 2
penalty = 0

server box CCcam config

SERVER LISTEN PORT:00000
SERIAL READER : /dev/tts/0 phoenix
B: /dev/tts/0 04
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/tts/0
N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 10000 ben ben 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: xxxxxxxxxx.dyndns.org 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: xxxxxxxxxx.dyndns.org 15001 ben ben 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes)
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes)
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000

Working client box CCcam config

SERVER LISTEN PORT:00000
SERIAL READER : /dev/tts/0 phoenix
B: /dev/tts/0 04
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/tts/0
N: xxxxxxxxxx.dyndns.org 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes)
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes)
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000

2nd client box not working CCcam config

SERVER LISTEN PORT:00000
SERIAL READER : /dev/tts/0 phoenix
B: /dev/tts/0 04
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/tts/0
N: xxxxxxxxx.dyndns.org 15001 ben ben 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes)
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes)
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000

Please any help will be greatly appreciated by this old fella.

**slippery49** · 31-05-11, 04:02 PM

Change to port on second box to 15000

**Vic** · 31-05-11, 05:36 PM

Get rid of all the crap in the CCcam.cfg files all you need is the N line

**band59** · 31-05-11, 05:52 PM

changed to 15000 but still wont work. Boy this is really frustrating...Help please....

**slippery49** · 31-05-11, 07:20 PM

Is it local or over the net

As vic said only have n lines in client cfg files

does it have network connectivity, test dhcp etc

**Vic** · 31-05-11, 07:28 PM

Try changing unique =1 for each user and have a seperare user for each box

**band59** · 01-06-11, 06:39 PM

was over the net but have change to local.

cleaned up cccam config

changed unique = 1

still not working....been reading all day and trying different things but none have worked ....will start again tomorrow after work thanks for trying guys ..Please let me know if you have any other ideas...

**DB44** · 01-06-11, 06:52 PM

In oscam.conf I have the following section:

[cccam]
port = 12000
reshare = 0
version = 2.2.1

It may be worth a try inserting a similar line, restarting and changing your non-working client to use port 12000.

Good luck.

**Dave001** · 01-06-11, 06:58 PM

So you have pictures on two decoders, but not the third one "Seems that files were deleted"?

If that's the case, I'd be flashing the third decoder again, use Dreamup and do at least two "Flash Erases" then program with PLI, reinstall CCcam and CCcam config and modify N line to suit your server.

I'd also be checking the PSU on the third decoder, as there has to be a reason for the files going missing in the first place and with a DM500, the PSU is the first thing to check.

Hope this helps,
Dave

**cro69** · 12-06-11, 02:10 AM

hey guys does anybody know how to use the failban feature in oscam?? ive got a couple of ip's that keep coming up in my oscam set up and want to ban them but i dont know how?

**Vic** · 12-06-11, 10:30 AM

Originally Posted by cro69

hey guys does anybody know how to use the failban feature in oscam?? ive got a couple of ip's that keep coming up in my oscam set up and want to ban them but i dont know how?

Yes I do and its in the documentation that comes with oscam

**johnwinger** · 12-06-11, 10:33 AM

Originally Posted by cro69

hey guys does anybody know how to use the failban feature in oscam?? ive got a couple of ip's that keep coming up in my oscam set up and want to ban them but i dont know how?

Sounds like someone is trying to connect or onshare your connection.

You will need to read the documentation as I do not believe you can add the IP address's via the web int.

**cro69** · 12-06-11, 01:44 PM

Originally Posted by Vic

Yes I do and its in the documentation that comes with oscam

any clues as to where in oscam to find the documentation??

**bartender** · 12-06-11, 02:29 PM

Originally Posted by cro69

any clues as to where in oscam to find the documentation??

**Hannible** · 12-06-11, 03:25 PM

Originally Posted by cro69

any clues as to where in oscam to find the documentation??

Are you using cccam as client cro?

If so, i think you can edit each user account and set cccam reshare to 0, that may help stop the reshare i think.

I think anti-cascading feature may also be of help as well.

Both features i have never used as i do not use cccam.

Tis the price you pay when you hand out N: lines cro

cheers
hannible

**cro69** · 12-06-11, 07:39 PM

hmmmmm a few free loaders il have to stop that!!!lol il do a sweep and black them out!! il change my addy and that will stop them!!haha

**johnwinger** · 12-06-11, 08:52 PM

Originally Posted by cro69

any clues as to where in oscam to find the documentation??

click on the name in the web if for oscam, its underlined hyperlink then search for what you want

this is what I grabbed

failbantime
HakenGruen.png parameter is optional

time for IP based blocking for clients with an invalid login attempt in minutes

Beispiel:

failbantime = 5
# IP will be blocked for 5 minutes. New logins are denied.
# no clientthread will be created.

Default:

failbantime = 0 # failban off (default)

Not sure if this blocks any IP with an invalid login attempt (this would be ideal for you) or if you have to specify the IP addresses

**johnwinger** · 12-06-11, 08:53 PM

Originally Posted by cro69

hmmmmm a few free loaders il have to stop that!!!lol il do a sweep and black them out!! il change my addy and that will stop them!!haha

Or someone is telling/sharing your addy with others so this might not work.

**cro69** · 12-06-11, 09:11 PM

il get to the bottom of it sooner or later il flushout the culprit!!! il give them all lights out if it continues!!!

then they can reshare nothing!!!lol

**Vic** · 12-06-11, 09:38 PM

Originally Posted by cro69

il get to the bottom of it sooner or later il flushout the culprit!!! il give them all lights out if it continues!!!

then they can reshare nothing!!!lol

Just what are you sharing cro as according to your post about changes affecting third part boxes you no longer have a card to share as you have taken it out of your Vu+Duo and put it in the foxtel STB