I would buy a new one. They're relatively cheap now on Ebay. You may hove done some damage with the foil short circuiting tracks in the remote.
Leroy
Hi guy's,
i had issues with the remote some buttons not registering, pulled the remote apart cleaned with isopropyl worked for about a week.
then last night had a brain wave, clued alfoil, put all together dream button stayed on for sometime remote functioned like new then nothing.
some of the alfoil moved to other tracks now nothing. i sense i wiped the code.
on a positive note all button do infact light up as it should lol.
question.....
do i need to jtag or can enter a command etc ?????
cheers oyama
1x Dm7000, 2x Dm500 SD
11-11-11 - NOW PoxBox
------------------------
Look Here -> |
I would buy a new one. They're relatively cheap now on Ebay. You may hove done some damage with the foil short circuiting tracks in the remote.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
All sorted, built jtag cable re flashed working like a dream
1x Dm7000, 2x Dm500 SD
11-11-11 - NOW PoxBox
------------------------
Dick Smith has a conductive paint that you can use to repair buttons. First clean them & the tracks with isopropyl alcohol, dab a spot of paint on each button & let it dry, put the whole lot back together & presto a fully working remote.
Bookmarks