Does it totally update the card ok Leroy ?
Hi Fellas,
I thought I'd upload my DM500 Nabilosat image for download. Becasue most use 10700lnb I changed before I took a dreamup image so should work. Channels scanned in for C1 (Austar) with Cccam 2.0.8 using external phoenix for one of those white colored cards.
You can download cams etc by hitting the yellow button twice.
Have a play and post some feedback.
Changed comms to zero's and enabled DHCP by default.
Leroy
Last edited by LeroyPatrol; 22-05-08 at 03:42 PM. Reason: New link added
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Look Here -> |
Does it totally update the card ok Leroy ?
It should. I haven't done extensive testing so it'd be good to get a bit of feed back. I thought because of the Gemini issues it's time to look at other images/options. The addons downloads work for adding in different cams etc. I haven't explored all it can do so if people play and post feed back that would be great.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Nabilosat are good images, nice work leroy.
Has anyone tried downloading it? Or is it just me?
That link crashes my firefox browser, pity as I would like to try this image.
Thanks Leroy.
KK
Cool , I will give it a try and post somefeedback later. Thanks for posting it.
I downloaded it no probs with IE
HHmmmmm
When I click on the link a HUGE textfile starts loading on my screen, slows my computer down till firefox crashes after about 45 seconds.
KK
I had downloaded & flashed the DM500 but this will save me the some time in getting it to work.
Thanks Leroy.
Downloaded fine for me with IE.
Ok , some probs. No picture with a card in a Phoenix. Anyone got the same problem ?
Leroy , not 100% sure but in the communication setup there is an IP address which I think might be yours as it looks to be from Oz. I have removed the link for the time being until I confirmation from you either way as I dont want it there if it has identifying information.
Ok that was my ISP's DNS ip address. I have just removed all ip info and selected DHCP as default.
I just zipped home for lunch and checked and my Jaycar phoenix works fine. Maybe all readers are not the same?
There is no reason why you can't use the current cccam.cfg file you just setup a few days back.
You could try deleting the 'phoenix' on the Serial Reader line to get your reader going also.
SERIAL READER : /dev/tts/0 phoenix
I replaced link above with new link to image with those changes.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
I thought I'd post some feedback,
I've just flashed with this download, copyed over the Cccam.cfg & other config files to the right places on the Dreambox & all works great.
PLI 2008 on 1 box this on the other.
Thanks
cool ill try this image thanks Leroy
I am still having problems though I am making progress.
As per Leroys suggestion I removed the word phoenix and instantly got pictures but I am having problems with it running for a minute or so then it stops for around 5-10 seconds and starts again.
Does anyone have any suggestions as to what the problem could be or any config changes I could make ? This what I have at the moment that is doing what I described.
SERIAL READER : /dev/tts/0
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERIAL READER : /dev/tts/0
TRY ALL CHIDS : /dev/tts/0
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes)
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes)
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
Sanity add the B line z80 suggested in another thread, that should take care of the stop/start and pixellation
Add to your CCam.cfg file
B: /dev/tts/0 07
Bookmarks