Page 1 of 7 1234567 LastLast
Results 1 to 20 of 131

Thread: Nabiosat DM500 Image

  1. #1
    Senior Member
    LeroyPatrol's Avatar
    Join Date
    Jan 2008
    Location
    N.E. Vic
    Posts
    16,229
    Thanks
    3,528
    Thanked 4,710 Times in 2,797 Posts
    Rep Power
    1669
    Reputation
    46551

    Default Nabiosat DM500 Image

    Hi Fellas,

    I thought I'd upload my DM500 Nabilosat image for download. Becasue most use 10700lnb I changed before I took a dreamup image so should work. Channels scanned in for C1 (Austar) with Cccam 2.0.8 using external phoenix for one of those white colored cards.
    You can download cams etc by hitting the yellow button twice.
    Have a play and post some feedback.



    Changed comms to zero's and enabled DHCP by default.

    Leroy
    Last edited by LeroyPatrol; 22-05-08 at 03:42 PM. Reason: New link added
    XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
    XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS



Look Here ->
  • #2
    Administrator
    admin's Avatar
    Join Date
    Jan 2008
    Location
    Victoria
    Age
    56
    Posts
    31,150
    Thanks
    2,238
    Thanked 13,731 Times in 5,823 Posts
    Rep Power
    4552
    Reputation
    165805

    Default

    Does it totally update the card ok Leroy ?

  • #3
    Senior Member
    LeroyPatrol's Avatar
    Join Date
    Jan 2008
    Location
    N.E. Vic
    Posts
    16,229
    Thanks
    3,528
    Thanked 4,710 Times in 2,797 Posts
    Rep Power
    1669
    Reputation
    46551

    Default

    It should. I haven't done extensive testing so it'd be good to get a bit of feed back. I thought because of the Gemini issues it's time to look at other images/options. The addons downloads work for adding in different cams etc. I haven't explored all it can do so if people play and post feed back that would be great.

    Leroy
    XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
    XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS

  • #4
    Senior Member z80's Avatar
    Join Date
    Jan 2008
    Posts
    5,840
    Thanks
    112
    Thanked 77 Times in 48 Posts
    Rep Power
    0
    Reputation
    708

    Default

    Nabilosat are good images, nice work leroy.

  • #5
    Senior Member Kavakid's Avatar
    Join Date
    Jan 2008
    Posts
    655
    Thanks
    102
    Thanked 105 Times in 73 Posts
    Rep Power
    231
    Reputation
    602

    Default

    Has anyone tried downloading it? Or is it just me?

    That link crashes my firefox browser, pity as I would like to try this image.

    Thanks Leroy.

    KK

  • #6
    Administrator
    admin's Avatar
    Join Date
    Jan 2008
    Location
    Victoria
    Age
    56
    Posts
    31,150
    Thanks
    2,238
    Thanked 13,731 Times in 5,823 Posts
    Rep Power
    4552
    Reputation
    165805

    Default

    Cool , I will give it a try and post somefeedback later. Thanks for posting it.

  • #7
    Senior Member Moof's Avatar
    Join Date
    Jan 2008
    Location
    Geelong, Victoria
    Age
    50
    Posts
    520
    Thanks
    48
    Thanked 62 Times in 33 Posts
    Rep Power
    220
    Reputation
    292

    Default

    I downloaded it no probs with IE

  • #8
    Senior Member Kavakid's Avatar
    Join Date
    Jan 2008
    Posts
    655
    Thanks
    102
    Thanked 105 Times in 73 Posts
    Rep Power
    231
    Reputation
    602

    Default

    HHmmmmm
    When I click on the link a HUGE textfile starts loading on my screen, slows my computer down till firefox crashes after about 45 seconds.


    KK

  • #9
    Junior Member
    Join Date
    Jan 2008
    Location
    Adelaide
    Posts
    223
    Thanks
    11
    Thanked 31 Times in 19 Posts
    Rep Power
    212
    Reputation
    371

    Default

    Quote Originally Posted by Kavakid View Post
    HHmmmmm
    When I click on the link a HUGE textfile starts loading on my screen, slows my computer down till firefox crashes after about 45 seconds.


    KK
    I am using firefox and had the same problem, but if you right click and use "save link as" it should work. It did for me.

  • #10
    Premium Member
    Join Date
    Jan 2008
    Location
    Melbourne
    Posts
    854
    Thanks
    246
    Thanked 87 Times in 69 Posts
    Rep Power
    243
    Reputation
    886

    Default

    Quote Originally Posted by Kavakid View Post
    Has anyone tried downloading it? Or is it just me?

    That link crashes my firefox browser, pity as I would like to try this image.

    Thanks Leroy.

    KK
    Downloaded for me yesterday with Firefox,.. cheers Leroy.

    Try right-click and save-as.
    Last edited by jimbo123; 22-05-08 at 01:12 PM.

  • #11
    Member
    Join Date
    Jan 2008
    Location
    Here & There
    Posts
    293
    Thanks
    136
    Thanked 23 Times in 13 Posts
    Rep Power
    208
    Reputation
    63

    Default

    I had downloaded & flashed the DM500 but this will save me the some time in getting it to work.

    Thanks Leroy.

  • #12
    Administrator
    admin's Avatar
    Join Date
    Jan 2008
    Location
    Victoria
    Age
    56
    Posts
    31,150
    Thanks
    2,238
    Thanked 13,731 Times in 5,823 Posts
    Rep Power
    4552
    Reputation
    165805

    Default

    Downloaded fine for me with IE.

    Ok , some probs. No picture with a card in a Phoenix. Anyone got the same problem ?

    Leroy , not 100% sure but in the communication setup there is an IP address which I think might be yours as it looks to be from Oz. I have removed the link for the time being until I confirmation from you either way as I dont want it there if it has identifying information.

  • #13
    Senior Member Kavakid's Avatar
    Join Date
    Jan 2008
    Posts
    655
    Thanks
    102
    Thanked 105 Times in 73 Posts
    Rep Power
    231
    Reputation
    602

    Default

    Quote Originally Posted by cabken View Post
    I am using firefox and had the same problem, but if you right click and use "save link as" it should work. It did for me.
    Thanks cabken and jimbo, I did not try that.......now the link is gone .....doh!


    KK.

  • #14
    Senior Member
    LeroyPatrol's Avatar
    Join Date
    Jan 2008
    Location
    N.E. Vic
    Posts
    16,229
    Thanks
    3,528
    Thanked 4,710 Times in 2,797 Posts
    Rep Power
    1669
    Reputation
    46551

    Default

    Quote Originally Posted by Sanity View Post
    Downloaded fine for me with IE.

    Ok , some probs. No picture with a card in a Phoenix. Anyone got the same problem ?

    Leroy , not 100% sure but in the communication setup there is an IP address which I think might be yours as it looks to be from Oz. I have removed the link for the time being until I confirmation from you either way as I dont want it there if it has identifying information.
    Ok that was my ISP's DNS ip address. I have just removed all ip info and selected DHCP as default.

    I just zipped home for lunch and checked and my Jaycar phoenix works fine. Maybe all readers are not the same?

    There is no reason why you can't use the current cccam.cfg file you just setup a few days back.
    You could try deleting the 'phoenix' on the Serial Reader line to get your reader going also.
    SERIAL READER : /dev/tts/0 phoenix

    I replaced link above with new link to image with those changes.

    Leroy
    XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
    XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS

  • #15
    Member
    Join Date
    Jan 2008
    Location
    Here & There
    Posts
    293
    Thanks
    136
    Thanked 23 Times in 13 Posts
    Rep Power
    208
    Reputation
    63

    Default

    I thought I'd post some feedback,
    I've just flashed with this download, copyed over the Cccam.cfg & other config files to the right places on the Dreambox & all works great.

    PLI 2008 on 1 box this on the other.

    Thanks

  • #16
    Senior Member
    LeroyPatrol's Avatar
    Join Date
    Jan 2008
    Location
    N.E. Vic
    Posts
    16,229
    Thanks
    3,528
    Thanked 4,710 Times in 2,797 Posts
    Rep Power
    1669
    Reputation
    46551

    Default

    Quote Originally Posted by Neutral View Post
    I thought I'd post some feedback,
    I've just flashed with this download, copyed over the Cccam.cfg & other config files to the right places on the Dreambox & all works great.

    PLI 2008 on 1 box this on the other.

    Thanks
    Thats what we like to hear.

    Leroy
    XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
    XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS

  • #17
    Junior Member
    Join Date
    Apr 2008
    Age
    48
    Posts
    88
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    197
    Reputation
    11

    Default

    cool ill try this image thanks Leroy

  • #18
    Administrator
    admin's Avatar
    Join Date
    Jan 2008
    Location
    Victoria
    Age
    56
    Posts
    31,150
    Thanks
    2,238
    Thanked 13,731 Times in 5,823 Posts
    Rep Power
    4552
    Reputation
    165805

    Default

    I am still having problems though I am making progress.

    As per Leroys suggestion I removed the word phoenix and instantly got pictures but I am having problems with it running for a minute or so then it stops for around 5-10 seconds and starts again.

    Does anyone have any suggestions as to what the problem could be or any config changes I could make ? This what I have at the moment that is doing what I described.

    SERIAL READER : /dev/tts/0
    CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
    CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    SERIAL READER : /dev/tts/0
    TRY ALL CHIDS : /dev/tts/0

    CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes)
    CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes)
    TRY ALL CHIDS : /dev/sci0
    SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000

  • #19
    Senior Member
    LeroyPatrol's Avatar
    Join Date
    Jan 2008
    Location
    N.E. Vic
    Posts
    16,229
    Thanks
    3,528
    Thanked 4,710 Times in 2,797 Posts
    Rep Power
    1669
    Reputation
    46551

    Default

    Quote Originally Posted by Sanity View Post
    I am still having problems though I am making progress.

    As per Leroys suggestion I removed the word phoenix and instantly got pictures but I am having problems with it running for a minute or so then it stops for around 5-10 seconds and starts again.

    Does anyone have any suggestions as to what the problem could be or any config changes I could make ? This what I have at the moment that is doing what I described.

    SERIAL READER : /dev/tts/0
    CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
    CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    SERIAL READER : /dev/tts/0
    TRY ALL CHIDS : /dev/tts/0

    CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes)
    CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes)
    TRY ALL CHIDS : /dev/sci0
    SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000

    delete one of the serial reader lines.....oops!

    Leroy
    XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
    XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS

  • #20
    Senior Member
    weirdo's Avatar
    Join Date
    Jan 2008
    Posts
    5,458
    Thanks
    4,638
    Thanked 3,135 Times in 1,633 Posts
    Rep Power
    0
    Reputation
    29602

    Default

    Sanity add the B line z80 suggested in another thread, that should take care of the stop/start and pixellation
    Add to your CCam.cfg file
    B: /dev/tts/0 07

  • Page 1 of 7 1234567 LastLast

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •